This post is more than 5 years old
2 Posts
0
9138
January 22nd, 2014 04:00
Restore
Hello
I have a Dell R720 server, after configuration RAID 5 by Disk Management and setup windows 2008 server r2 sp1 . i tried to reboot from windows 2008 server r2 sp1 cd . When attempting to do a full restore, winre sees the backup image but does not see any hard drives to target for the restoration. The disk controller is a PERC S110 or H310. Symptoms are identical for both R720s. Diskpart does not see any drives. What can be done to let winre see the drives? Dell support has provided no help. Thanks in advance? can you help me
thank you
No Events found!
DELL-Geoff P
990 Posts
0
January 22nd, 2014 06:00
Khalidjr2,
You will need the controller drivers for the S110 and H310 extracted to a USB key so the installation can see the drives beyond the controller.
S110: http://www.dell.com/support/drivers/nz/en/nzbsd1/DriverDetails/Product/poweredge-r720?driverId=FNPHT&osCode=WS8R2&fileId=3202473198&languageCode=en&categoryId=SF
H310: http://www.dell.com/support/drivers/nz/en/nzbsd1/DriverDetails/Product/poweredge-r720?driverId=4R5XT&osCode=WS8R2&fileId=3264560905&languageCode=en&categoryId=SF
Regards,
khalidjr2
2 Posts
0
January 22nd, 2014 20:00
Hello
thank you for your help, My problem it solved.
best regurd