Unsolved
This post is more than 5 years old
4 Posts
0
9604
March 15th, 2004 01:00
Unable to mount SYS volume after receiving E0D76 error on LCD panel
Dear friends,
I have PE6650 with 5 hdd, RAID 5 and NW 6 SP.2 installed.
Recently, the LCD displays "E0D76" error message (drives failure) but the hdd LED was still green. I did a complete hardware check to make sure that my server is OK. The results were all "pass".
What confuse me is, how come the LCD panel keep displaying the same error message (E0D76) and why I am still unable to mount the SYS volume ? How do I determine wether the data on my raid 5-configured-and-still-intact disks is still OK or not ?
Please guys, help me on this. I'm desperate here.
Thx in advance for all your reply.
No Events found!
ravikanth
10 Posts
0
March 15th, 2004 01:00
What is the raid controller model and firmware version?
also perform an integrity check on your RAID 5.
Regards
Ravi
indrawan
4 Posts
0
March 15th, 2004 01:00
I used Perc 3DC and the firmware virsion is A24
I also ran consistency check on my raid configuration and the last status was optimal.