Unsolved
This post is more than 5 years old
1 Message
0
6355
May 5th, 2004 15:00
W2K SP3 to W2K SP4
I have a PE 2600 server with W2K SP3...
I was going to install SP4 are there any known issues?
Thanks,
Tim
No Events found!
Unsolved
This post is more than 5 years old
1 Message
0
6355
May 5th, 2004 15:00
I have a PE 2600 server with W2K SP3...
I was going to install SP4 are there any known issues?
Thanks,
Tim
Top
Per_R.
157 Posts
0
May 5th, 2004 19:00
Tim,
as far as I know there are no known issues. As before every software change you should ensure you've a working backup. If you are using an Adaptec 39160 SCSI controller it could happen that the original Adaptec drivers will be overridden with Microsoft versions so you've to check this after the upgrade and reinstall the Adaptec drivers if necessary. Also ensure you've a current version of the Dell OpenManage tools installed, because some older versions will not work properly with SP4.
Message Edited by Per_R. on 12-20-2005 12:46 AM
Neso
2 Posts
0
July 24th, 2004 15:00
i've the same case as urs but nothing happen and my server is PE4600.
i've noticed a little slowness in the process of the starting up, nothing else.
MattFrancis
248 Posts
0
January 18th, 2005 15:00