Unsolved
This post is more than 5 years old
3 Posts
0
10126
March 14th, 2013 21:00
Windows Server 2012 on PowerEdge 2800
Hi Guys!.
I'm new here so, I have a PowerEdge 2800 (a big gift ) with a PERC 4e/Di to learn who to install a sever, I have never Installed a server with a RAID or PERC.
Can you please guide me? I don't see the Hard Disk, I Downloaded a few PERC drivers from Dell but nothing.
Thanks for your help :emotion-1:
theflash1932
9 Legend
•
16.3K Posts
0
March 14th, 2013 21:00
Use the 2008 R2 driver, as there are (and will be) no 2012 drivers:
ftp.dell.com/.../LSI-LOGIC_MULTI-DEVICE_A00_R227150.exe
Also remember that the PERC RAID controller does NOT support non-RAID, so you MUST configure RAID in the CTRL-M PERC utility during POST. If RAID is not configued, Windows can see no drives, even with the right drivers.
skinnyveganboy
19 Posts
0
March 15th, 2013 02:00
This guy helped me when I was learning.
skinnyveganboy
19 Posts
0
March 15th, 2013 03:00
skinnyveganboy
19 Posts
0
March 15th, 2013 03:00
at 6:30 he boots into BIOS
skinnyveganboy
19 Posts
0
March 15th, 2013 03:00
RAID Types Explained With Diagrams
JOHN1382
3 Posts
0
March 15th, 2013 08:00
HELLO!
Yesterday night (very night jaja) finally could Install!!
Thanks for all your help!!