2 Intern
•
130 Posts
1
56
January 17th, 2025 13:58
Determining SRDF/A TBs being replicated to DR Site
Hello. We've SRDF/A setup and we can see the symdevs being replicated with symrdf query command. We can also list all with 'symcfg -rdfg all' command. We can see the I/O going (rcvd+sent & IO/sec KB/sec) etc fine with symstat command. Now, how to determine what is the Total TB being replicated to DR side. Is there any command in SE to do that. With symdg we can see the number of symdevs being replicated. But how to find the total TB being replicated. Please advise. Thanks
No Events found!
DELL-Josh Cr
Moderator
•
9.4K Posts
2
January 17th, 2025 21:32
Hi,
Thanks for your question.
What version are you on? I don’t see anything that does this. https://dell.to/3Wp8K5R
Let us know if you have any additional questions.
Bhuppi1
2 Intern
•
130 Posts
2
January 17th, 2025 22:05
@DELL-Josh Cr Hi. V9.2.3.1. CLI guide shared is good.
Wow, such a shame that there is no command to find out how much TBs is being replicated to DR. As far as I know SE is there since 2000s(including SRDF commands) or even far back. And, there is no way to find out this simple thing. Not good. Atleast needs to be a way on what source/target capacity is being replicated .🤔.
But then you also doesn't seem to doing proper homework at times. I just ran symdg list -v. And, whoa, I get the Cap(MB) of each of the DEVXXX, and just add them you have it right there 😀✌️.
Example:
Thanks.
DELL-Josh Cr
Moderator
•
9.4K Posts
2
January 21st, 2025 13:38
Good to know. Great that you got it working.