Hi
I have 2 RedHat Enterprise 4 Linux nodes running on a RedHat cluster on a CX300.
In each nodes, there are 2x HBA Qlogic cards.

One of the node, is showing just one HBA card, even though in reality there shld be 1 more HBA card, total 2 HBA cards.

[root@misln01 scsi]# powermt display
Symmetrix logical device count=0
CLARiiON logical device count=6
==============================================================================
----- Host Bus Adapters --------- ------ I/O Paths ----- ------ Stats ------
### HW Path Summary Total Dead IO/Sec Q-IOs Errors
==============================================================================
1 qla2xxx optimal 12 0 - 0 0


A run of scli Qlogic utlity confirm this.

Host Name : misln01.pen.comm.mot.com
OS Type : Linux - Red Hat Enterprise Linux AS release 4 i686
OS Version : 2.6.9-42.0.10.ELsmp
FO API Version : 2.2.9
SDM API Version : v2.02 beta14
-----------------------------------------------------------------------------
HBA Model QLA2340:
Port 1: WWPN 21-00-00-E0-8B-8F-26-92 SN K20454 FW 3.03.19 Online
HBA Model QLA2340:
Port 0: WWPN 21-00-00-E0-8B-8F-73-97 SN K21811 FW 3.03.19 Online
-----------------------------------------------------------------------------
Total QLogic HBA(s) : 2

I have tried to run powermt config, but still its showing 1 HBA card.

What shld I do to get the other HBA card shown in PP without affecting the I/O.

Thanks

Zainal