How often does powerpath check/test the dead paths?

Question

Hi All, Environment: AIX 7.2 server, Powerpath 6.2; with LUNs from VPLEX. Note: The LUNs have 8 paths, 4 paths via 1 VPLEX Serial, and 4 via another. The 2 VPLEX VS6 are in different site and in metro configuration. There was a WAN communication glitch between the 2 VPLEX VS6.  I am told this should not have caused any issues (if anything there would have been path related issues for 30 seconds). However from the AIX server we all 4 paths via 1 VPLEX serial were marked dead; and the same paths were marked alive again after 5 minutes.  Why is this delay?  Hence the question.  How often does powerpath check/test the dead paths.  Is this configurable or hard coded? Pseudo name=hdiskpower113VPLEX ID=VPLEX-A , VPLEX-BLogical device ID=1234state=alive; policy=ADaptive; queued-IOs=0==============================================================================--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---### HW Path I/O Paths Interf. Mode State Q-IOs Errors==============================================================================0 fscsi0 hdisk433 CL2-12 active alive 0 00 fscsi0 hdisk478 CL2-1E active alive 0 00 fscsi0 hdisk520 CL1-12 asb:prox alive 0 10 fscsi0 hdisk562 CL1-1E asb:prox alive 0 11 fscsi2 hdisk607 CL2-17 active alive 0 01 fscsi2 hdisk652 CL2-1B active alive 0 01 fscsi2 hdisk694 CL1-17 asb:prox alive 0 11 fscsi2 hdisk736 CL1-1B asb:prox alive 0 1   ********** Excerpts from the server error report ******* hdisk520|hdisk562|hdisk694|hdisk736Dec 7 18:35:45 hdisk562 I EMCP_PATH_ALIVE BACK-UP PATH STATUS CHANGEDec 7 18:35:45 hdisk736 I EMCP_PATH_ALIVE BACK-UP PATH STATUS CHANGEDec 7 18:35:44 hdisk694 I EMCP_PATH_ALIVE BACK-UP PATH STATUS CHANGEDec 7 18:35:44 hdisk520 I EMCP_PATH_ALIVE BACK-UP PATH STATUS CHANGEDec 7 18:30:20 hdisk694 P EMCP_PATH_DEAD CONNECTION FAILUREDec 7 18:30:20 hdisk520 P EMCP_PATH_DEAD CONNECTION FAILUREDec 7 18:30:20 hdisk562 P EMCP_PATH_DEAD CONNECTION FAILUREDec 7 18:30:20 hdisk736 P EMCP_PATH_DEAD CONNECTION FAILURE

DELL-Sam L · Answer

Hello sshekar, Here is a link to a KB that maybe of assistance. https://dell.to/3qQmxRD

PowerPath

Was this post helpful?