Unsolved
This post is more than 5 years old
155 Posts
0
1500
June 23rd, 2008 20:00
pseudo device
Please share your thoughts
The following disk are available on the system, METASET is not able to initialize the pseudo disk or MULTIPATH disk, I am trying the following.
xxxx # metaset -s smsc-ms -a emcpower0a
metaset: abha: emcpower0a: not a valid drive name
The following disk are available on the system, METASET is not able to initialize the pseudo disk or MULTIPATH disk, I am trying the following.
xxxx # metaset -s smsc-ms -a emcpower0a
metaset: abha: emcpower0a: not a valid drive name
No Events found!
xe2sdc
6 Operator
•
2.8K Posts
0
June 24th, 2008 01:00
Powerpath does its job even when you use "native" (Solaris) devices ( cXtYdZs2 ) .. So the solution is to simply run metainit against the native devices.
Cheers !!
SKT2
2 Intern
•
1.3K Posts
0
June 25th, 2008 11:00
I am not familair with metaset.
lenystr
43 Posts
0
August 31st, 2011 17:00
Does emc180389 only apply to PowerPath 5.0? We have Sys Admins who have been using the pseudo device without any issues on PowerPath 5.2 .1 and 5.3.
MorbidAngel1
62 Posts
0
September 12th, 2011 17:00
Please use the full device naming ---
like metaset -s oraset -a /dev/dsk/emcpowera /dev/dsk/emcpowerb /dev/dsk/emcpowerc
or for clusters---
metaset -s oraset -a /dev/did/dsk/d25 /dev/did/dsk/d24