Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

jbbank

1 Message

4151

October 16th, 2005 16:00

110T LTO-2 doesn't report correct capacity

I've recently bought a LTO-2 SCSI drive, but under Veritas, I see the total capacity for the these tapes to be only 20GB or more precisely, 17.8GB. If I'm not mistaken, LTO-2 should have a 200GB native cap. I don't know if it's a software issue, or the hardware is reporting the wrong capacity. Has anyone seen this before and know what to do to correct it?
 
Thanks
 
 

Dev Mgr

6 Operator

 • 

9.3K Posts

 • 

3 Points

October 17th, 2005 11:00

Did you search the Veritas KB? As it's their software misreporting, maybe they have some info on this. A few things that come to mind are to patch the application and/or download the latest Veritas driver package (this is the drive package that the application uses and is available from the Veritas site).

Their KB is pretty good in my experience.

support.veritas.com

cadams58

1 Message

October 18th, 2005 15:00

I have the same issue but it didn't start until I upgraded the firmware on the tape drive.

Was this post helpful?

View All

No Events found!

Top