Unsolved
This post is more than 5 years old
1 Rookie
•
205 Posts
0
11580
MD1200/PERC H810 not seen in Nautilus A49 DOS updater
Trying to get 12-4TB disks to update their firmware attached to an R610, and it simply is not seeing them. Is this systematic? I can see the controller and drives just fine during POST, just not once i get up to the update utility.
DELL-Daniel Ca
243 Posts
0
July 9th, 2015 13:00
Hello, Mtexter.
My page on the MD1200 only shows A48, I would suggest trying that one. It's likely that A49 will be a no go.
Here's a link:
downloads.dell.com/.../NautilusDOSA48_ZPE.exe
(Nautilus Firmware Update Utility for SAS and SATA disk and solid state drives, vA48, released 12/12/13
This tool creates a bootable CD, USB Flash drive, or image for DRAC 5/6 virtual media, which you'll then need to boot on to install. The update process will bring up a GUI; select Automatic Update )
This may also be helpful:
Video how-to - Choose " How to use the Hard Drive Firmware Tool with a bootable CD to update all SAS/SATA or SCSI drives."
Let me know if this does the trick.
Mtexter
1 Rookie
1 Rookie
•
205 Posts
1
July 10th, 2015 06:00
A49 worked fine when I tried the enclosure on a PERC H800 (didn't end up mattering, the version on A49 is only GS0A, i needed GS0F), so I wonder if the PERC H810 just isn't supported by DOS bootables. I bet UEFI version A13 would have had a better shot.
Anyway, i was able to update eventually from my OS, after extracting the correct bin file from the latest SUU iso. Procedure is here: en.community.dell.com/.../19637978
Thanks!