MD3200i Vxworks password

Hi,

I have the following situation:

 

-=<###>=-
Instantiating /ram as rawFs, device = 0x1
Formatting /ram for DOSFS
Instantiating /ram as rawFs, device = 0x1
Formatting...Retrieved old volume params with %38 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number 10000
Label:" " ...
Disk with 1024 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT12, sectors per cluster 1
2 FAT copies, 1010 clusters, 3 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 6
Root dir entries 112, sysId VXDOS12 , serial number 10000
Label:" " ...
Instantiating /ram as rawFs, device = 0x1
OK.

RTC Error: Real-time clock device is not working

Adding 13888 symbols for standalone.
Length: 0x13c Bytes
Version ver03.0A

Current date: 10/23/19 time: 13:38:30

NetApp, Inc. RAID Controller
Copyright 2008-2013, NetApp, Inc. All Rights Reserved.
Copyright 1984-2006 Wind River Systems, Inc.
VxWorks: VxWorks 6.5 Kernel: WIND version 2.10
Model: 2660 Firmware version: 07.810/23/19-13:38:30 (tRAID): SOD Sequence is Normal, 0 on controller A
4.47.60

->
Serial Port shell started.
10/23/19-13:38:31 (tRAID): NOTE: Turning on tray summary fault LED
10/23/19-13:38:31 (tRAID): NOTE: SODRebootLoop- Limit:5 Cnt:43
10/23/19-13:38:31 (tRAID): NOTE: Flashing tray summary fault LED
10/23/19-13:38:31 (tRAID): WARN: Controller entering SODReboot lockdown state...

 

I have tried run lemclearlockdown, but i can't access the shellUsr. Someone hae the password of shellUsr of MD3200i?

 

Best Regards,

Diego Costa