This post is more than 5 years old
4 Posts
0
1406
June 19th, 2019 06:00
tl2000 drive removal
my TL2000 keeps showing a warning because I removed the second drive from it
also in backup exec it is always detected again at restart (in offline state)
how do I clear that?
tapelibraryfixer
2 Intern
•
427 Posts
0
June 20th, 2019 00:00
The manual says:
To remove the "Missing drive" indicators on the Operator Control Panel
(Attention LED) and the Web User Interface (System Status screen), modify
or resubmit logical library setting (Operator Control Panel: Configure >
Logical Libraries or Web User Interface: Configure Library > Logical
Libraries).
tapelibraryfixer
2 Intern
•
427 Posts
0
June 19th, 2019 08:00
you could try reseting the library to defaults that will solve it, but it will clear your settings obviously.
Homi99
4 Posts
0
June 19th, 2019 08:00
yes
multiple times
additional info: the display of the lib shows drive 1 with a check mark
and drive 2 with an exclamation mark
when a lib has never had a second drive then there is nothing under the drive 2 (i know because i have two of the libraries)
tapelibraryfixer
2 Intern
•
427 Posts
0
June 19th, 2019 08:00
have you tried rebooting the library and just deleting the drive from backup exec
Homi99
4 Posts
0
June 19th, 2019 09:00
that was also my last resort idea...I am pretty sure that would work
but I hoped that someone knows a fast way to fix it
DELL-Sam L
Moderator
•
7.7K Posts
0
June 20th, 2019 07:00
Hello Homi99,
What you can also try is to try to flash the library firmware. When doing a library firmware your system should inventory and only see one drive and should remove all other drives.
Please let us know if you have any other questions.
Homi99
4 Posts
0
June 25th, 2019 04:00
although there is absolutely nothing that can be changed in there just pressing save worked
thank you!