Solved!
Go to SolutionH
haytham_kamel
1 Rookie
•
30 Posts
0
71
September 13th, 2024 01:17
bios set up
Please, after I convert my Sas HDD from Mbr to Gpt I can't enter the bios setup page by pressing f2 or bios setup from f12, and to boot into Windows I must press f12 first and choose UEFI to boot.
Chino de Oro
11 Legend
•
8458 Posts
•
46451 Points
0
1
Posted September 13th, 2024 02:17
Replace the coin cell battery and clear CMOS via jumper (if applicable).
For optimal performance, adjust BIOS settings to match hardware and usage preferences. Then, perform a clean OS installation with up-to-date drivers and firmware.