Unsolved
1 Rookie
•
11 Posts
•
2 Points
0
179
July 13th, 2025 15:41
T5820 RTX 5080 FE gpu for install
I was wondering if T5820 can install the RTX 5080 FE GPU (length 304mm, width 137mm, height 40mm). I think T5820 are large enough for the length and height, but I have concerns about the width. Is T5820 too slim to close the case side cover? Do I have to have the side cover open?
Thanks for any help you can give me:)
0 events found
No Events found!
uco73
2 Intern
•
62 Posts
1
July 13th, 2025 20:37
Yes, you can. I have same pc but inside my 5820 is RTX 3080 Ti. Working flawless.
zgkdzw
1 Rookie
•
11 Posts
•
2 Points
0
July 13th, 2025 23:35
@uco73 Thanks for letting me know. Yeah, I think the T5820 can install the RTX 5080 founders edition (FE). However, I am not sure if I still can close the side case cover. May I know your 3080 Ti GPU model name, so that I can know your GPU size? Thank you.
uco73
2 Intern
•
62 Posts
1
July 14th, 2025 08:14
@zgkdzw my GPU is 320mm lenght, and 117mm height. But you must remove GPU holder from pc before you put new gpu inside. If you gpu height same as gpu bracket, that's it.
uco73
2 Intern
•
62 Posts
1
July 14th, 2025 08:26
My gpu is Manli RTX 3080 Ti but you must remove gpu holder from pc before you put new gpu.
zgkdzw
1 Rookie
•
11 Posts
•
2 Points
0
July 14th, 2025 20:14
@uco73 Got you. Thanks for providing the info. Yeah, I will remove the PCIe holder for more space.
Tgorbach
1 Rookie
•
3 Posts
•
2 Points
0
September 15th, 2025 14:25
I am looking to install a Nvidia 5080 in my EBT2250 and am curious how your GPU is wired to the power supply. Do you have the part numbers for the power supply cables? I have a 1000-watt Power supply and it only has 2x8 pin connectors with 2 pigtail 6 pins connectors. I know the unit will power the card, but being a proprietary power supply, I don't want to chance that they have altered the wiring connections.
uma299792
1 Rookie
•
3 Posts
•
2 Points
0
November 2nd, 2025 05:58
@Tgorbach
Am in the same boat- were you able to figure this out?
Tgorbach
1 Rookie
•
3 Posts
•
2 Points
0
November 2nd, 2025 15:22
Yes, I purchased a pigtail from Amazon to feed the two 6 pin plugs into a 8 pin plug. This fed the third plug from the 16 pin adapter the mfg supplied. TeamProfitcom Dual 6 Pin Female... This is the unit I purchased.
I also installed a magnetic support arm to hold the unsecured end of the gpu. Hope this helps.