We just returned a 2335dn because every few days it would say "Initializing" on the screen and essentially get stuck such that you could not print or fax until the unit was powered off and then back on. Our replacement unit does that same thing. This is a serious problem because the unit is located on another floor and I cannot afford to have this printer get stuck every few days. Has anyone else experienced this or found a solution? Thanks.
I talked to one of our printer engineers and he said there may be something on your network triggering the event. Could you set your preferences to accept private messages so I can get some information from you for them?
Two printers that did the same thing? I think we need to look in other places for the problem. Two back-to-back machines with the same problem usually doesn't indicate a problem with the printer. In the area I work, I have several of the same model and we have NEVER experienced what you claim.
It sounds like you have the issue narrowed down to "every few days". Any chance to narrow it down more than that?
Is the printer IP set Static (manually) or DHCP?
Some ideas:
Unplug the network cable from the printer each night before you leave work. (depending on the lease time of your router, it might be a good idea to set the IP is set manually) If you can return in the morning, plug the network cable in and begin printing, I think you can point the finger at something fickle with the network.
IF you come in and find the printer displaying the "Init" message (printer hung), strongly suspect power. Is your power stable thru the day and night?
Anyone find a resolution to this problem? We just purchased one of these units and it's doing the same thing, except it is STUCK on "Initializing" from the moment you power it on. We have plenty of other networked printers that work fine. Even one sitting right next to this one (different Dell model). I have powered it off, unplugged it, powered it back up and same message.
If the original poster could post their resolution it would be appreciated.
I'm not sure I really ever got a resolution, but I haven't seen the "Initialzing" message for several weeks now. I haven't changed anything on my network that I know of and the phone line is still plugged in like it was before. A mystery indeed, but it's working now so I am happy for now. Sounds like your unit may actually have something wrong with it since it never passes the "Initializing" stage.
I too have this same problem. I have had the printer replced by one of the Dell Techs and this one does the same thing and it's the phone line that does it.
I have had the phone line unhooked for 6 weeks now and no problems. Today I plugged in back in and with a few hours it's back to stuck on initializing.
A couple of things to note. The phone line is a phone line from a Vonage Phone adapter, it also did it with the previous phone adapter. Old Adapter was a Linksys PAP2T and the new one is thier V-Portal phone adapter. Behavior on the printer is the same regardless of which phone adapter is hooked up. Un hook the phone line from the back of the machine and it works beautifuly.
Not real practicle having a fax machine that you can't hook a phone line up to. Any one have any ideas?
Ahhh...... now we have something to work with. The adapters you speak of are used on "VOIP" (Voice Over IP) circuits, which means when you make a phone call, your call is using the Internet to make the call.
What does this mean? Well, sorry...... but NONE of the Dell Fax printers are designed to function on VOIP circuits.
If you want this to work, you will need to contact your local telephone company and have them install a "POTS" (Plain Old Telephone Service) line into your house/business.
Now for the $64,000 question...... Did the Dell tech ever discuss or ask about VOIP? (In other words, this printer should never have been replaced)
So, first the answer to the 64,000 question. No the Dell tech didn't ask about the source of the phone line, frankly at the time I don't think I had it nailed down to the phone line that was causing the problem.
I get that VOiP fax lines are inherrantly difficult becuase of the encoding that goes on messes with the quality of the line. But this thing goes to "INITIALIZING" while NOT receiving or sending any faxes. As a matter of fact, if I reset it, and while it's not "initializing" I can send AND receive faxes quite nicely. Now, I did have to set the speed of the fax from AUTO down to 19,200 to get it to be reliable but it works quite nicely otherwise.
Can you explain how the fact that's its plugged in to a local adapter causes it go to INITIALIZING when its NOT making or receiving calls?
The other thing you should know is I have an older fax machine that I hooked up to this durring the 6 week test, and it had NO problems.
I would also like to hear from any other who have this same problem. Are your machines hooked up to POTS lines or are they on a VOiP adapter.
Sorry Bryan...... If I have, it wasn't my intention to upset you.
All I was doing was passing on information that Dell Tech support has given me.....
NONE of the Dell Fax Printers support faxing when connected to a VOIP circuit
Dell Tech support does not support FAX issues for machines connected to VOIP circuits.
The fact that your are able to get it to work at all..... you're lucky. As to why the other "older" fax machine works? Not sure, but if compared against each other, I'd bet it has something to do with the speed rating and other capabilities of the machines.
I hope you get some good replies on the question you promoted.... POTs vs. VOIP
DELL-Jimmy P
2 Intern
•
1542 Posts
1765
1
Posted December 17th, 2008 16:00
PMaggan
I talked to one of our printer engineers and he said there may be something on your network triggering the event. Could you set your preferences to accept private messages so I can get some information from you for them?