Unsolved
This post is more than 5 years old
3 Posts
1
4802
January 22nd, 2017 05:00
Dell E514DW - Setting default scan parameters at Operator Panel???
Is there a way to save my new scan parameters as default into the e514dw mfp for scanning from the device (not the software)? When I initiate a new scan from the MFP, I must touch every menu option in order to change the defaulted 100dpi to higher value. Is there any way to save my desired configuration into the MFP for future scans? I realize they can be set via the Printer Hub but I'd like to be able to scan without a trip back to the computer. Thanks.
0 events found
No Events found!
DELL-Jesse L
Moderator
•
17.9K Posts
•
69K Points
0
January 23rd, 2017 08:00
lpsengineer,
You can click the link below to download the online manual for information on printer settings.
Dell E514DW Printer Drivers, Downloads and Manuals
http://dell.to/2kkbxZB
lpsengineer
3 Posts
0
January 23rd, 2017 09:00
Thanks, but the manual doesn't answer the question. I'm trying to save new settings into the scanner portion of the MFP. The default is 100 dpi. Who ever sans at the low resolution?? I don't want to have to wade thru all the menus when I scan from the machine.
DELL-Jesse L
Moderator
•
17.9K Posts
•
69K Points
0
January 25th, 2017 05:00
You will need to contact Dell Printer Support for more information on setting the printer. The phone numbers are listed below.
Dell Support
www.dell.com/.../customer-support-phone-numbers
JustPrint
52 Posts
0
February 18th, 2017 16:00
E514dw / E515dw does support scanning initiated from the device to the PC. From the control panel it will be listed as Scan to PC. Unfortunately, the Scan to PC only supports per-job settings.
If you want to set default scan settings, then you should use the Dell Printer Hub (scanning initiated from the PC).