Hi, Im programming an AMX controller that has 2 DELL5100MP Projectors connected on serial,
both on different ports, at 19200,n8,1
Now I have the document from AUG 2005 on the RS232 Protocol Pin Assignment
But i get responses that are not documented.
What I do is
SEND POWER ON TO PROJECTOR
GET OK
wait 61 sec for heating
SEND SET AUTO SOURCE ON (I Found that if AUTO SOURCE is off the INPUT is NOT CHANGING)
WAIT 0.5 SEC
SEND SET COMPOSITE
wait 0.5
SEND AUTOSOURCE OFF
Now the strange thing is the Projector sends data after 20sec from the pwr-on
BE EF 10 09 00 70 17 33 33 05 00 D1 41 31 30 30
This is NOT documented where to get more info on the RS232 Protocol
SYSTEM[1]16:00:51 From DellProjector.axs DELL_POWER_ON
SYSTEM[1]16:00:52 From DellProjector.axs 285 vdvProj_LeftString Received <00>
SYSTEM[1]16:00:52 From DellProjector.axs DELL(OK)
SYSTEM[1]16:01:13 From DellProjector.axs 285 vdvProj_LeftString Received <10><09><0
0>p<17>33<05><00> A100
SYSTEM[1]16:01:16 From DellProjector.axs 285 vdvProj_LeftString Received <10><09><0
0>; 33<05><00> AKU4
SYSTEM[1]16:01:20 From DellProjector.axs 285 vdvProj_LeftString Received <10><15><0
0>o`33<11><00> <01>U<00><0C><00><01><00> <03> <00><00><01> <14>
SYSTEM[1]16:01:23 From DellProjector.axs 285 vdvProj_LeftString Received <10><05><0
0><00><8C>33<01><00>
SYSTEM[1]16:01:27 From DellProjector.axs 285 vdvProj_LeftString Received <10><06><0
0> <17>33<02><00> U
SYSTEM[1]16:01:33 From DellProjector.axs 285 vdvProj_LeftString Received <10><05><0
0> <0D>33<01><00>
SYSTEM[1]16:01:38 From DellProjector.axs 285 vdvProj_LeftString Received <10><06><0
0> <17>33<02><00> U
SYSTEM[1]16:01:45 From DellProjector.axs 285 vdvProj_LeftString Received <10><09><0
0>; 33<05><00> AKU4
SYSTEM[1]16:01:53 From DellProjector.axs DELL_IS_ON
SYSTEM[1]16:01:53 From DellProjector.axs DELL5100(ASOURCE_ON)
SYSTEM[1]16:01:54 From DellProjector.axs 285 vdvProj_LeftString Received <01>
SYSTEM[1]16:01:54 From DellProjector.axs DELL(INVALID COMMAND)
SYSTEM[1]16:01:54 From DellProjector.axs DELL5100(COMP)
SYSTEM[1]16:01:54 From DellProjector.axs 285 vdvProj_LeftString Received <01>
SYSTEM[1]16:01:54 From DellProjector.axs DELL(INVALID COMMAND)
SYSTEM[1]16:01:55 From DellProjector.axs DELL5100(ASOURCE_OFF)
SYSTEM[1]16:01:55 From DellProjector.axs 285 vdvProj_LeftString Received <01>
SYSTEM[1]16:01:55 From DellProjector.axs DELL(INVALID COMMAND)
SYSTEM[1]16:02:01 From DellProjector.axs 285 vdvProj_LeftString Received <10><09><0
0>; 33<05><00> AKU4
SYSTEM[1]16:02:33 From DellProjector.axs 285 vdvProj_LeftString Received <10><09><0
0>; 33<05><00> AKU4
SYSTEM[1]16:02:49 From DellProjector.axs 285 vdvProj_LeftString Received <10><09><0
0>; 33<05><00> AKU4
Are you controlling and sending the controls from a laptop or the AMX controller? I am trying to test our 2400 and 5100 projectors using hyperterm and I cannot type the commands in.
sensor-is
2 Posts
124
0
Posted April 17th, 2007 19:00