UNSOLVED
Pink Image with 3200MP
I have a 3200MP that is not used often but is great! This time my image appears with a pink cast. The start up logo appears clear with blue and white but the PC image has distorted colors best described by pink where I see whites. No lamp light is going on. Any thoughts? Cable does not appear to be missing any pins. Thanks!
1436
0
Posted July 8th, 2005 13:00
Dear Moderator,You have asked how the projector is "hooked up". It has its power cable connector connected, and it has the MI connector lead to a Latitude laptop (including the USB connection). The laptop was only powered up once the Dell white screen showed "connection loss" icon and words. This lead was removed (to see if the warming up phase would complete, and reconnected. The remote was also tried, but total lock-up remains.1436
0
Posted July 8th, 2005 15:00
helplessanduseless,
Is there another system to try it on?
DELL-Chris M (old account)
#IWork4Dell
1436
0
Posted July 11th, 2005 01:00
Someone else seemed to pick up this thread and reply to you. my (EKM's) reply for hook up is as follows. Simple connection of laptop to projector using Dell included cable (which does not seem to be a standard projector cable I am told). Connects to both USB and monitor ports on back of laptop and into large connection in back of projector. Same connections and laptop used for history of projector without problems.1436
0
Posted December 19th, 2011 13:00
My Dell 3200MP is now having a pink tint screen. We have had this projector for several years but the pink tine just started a couple of months ago. I have checked the cable by using a cable from another projector. I also tried changing the setting on the projector and the laptop. Is there a "fix" for this problem? Thanks.
1436
0
Posted August 30th, 2014 17:00
Has there been a fix found for this yet?
I recently had to replace my color wheel and now I am experiencing the pink instead of white issue. I tried it on my Inspiron 1520, and my HP desktop with no change.
1436
0
Posted September 3rd, 2014 16:00
So I took my projector apart and blew it out and now instead of a pink tint, I'm getting a green tint.
White boot screen and blue searching for signal screen are normal. Only changes once it finds a signal. Source found Info in lower corner remains pure white while rest of screen tints green.
Losing my faith in dell products.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
1436
0
Posted July 7th, 2005 18:00
Walk me through how the projector is hooked up.
DELL-Chris M (old account)
#IWork4Dell