CBL0008: Backplane 1 connector PCIeA is incorrectly

GearoidGriffin,

I would start with powering down the server, remove the ac cables and drain the flea power by holding the power button for 20 seconds. After that then I would reseat the backplane cables at both ends.Also, was this working previously, but then you started seeing the error, or is this happening when you are first using the server?

Let me know what you see.

Hi Chris

I recently "inherited" a few servers recently from another business unit and this was the error when I powered up this particular server

I did reseat the cables at the side closest to the PSU's but not at the backplane side

I will do that and come back to you

Thanks

Gearoid

Just reseated everything on backplane and the node came up!

Thanks for the advice Chris

Gearoid