Start a Conversation



1 Message


November 27th, 2023 14:15

Dell poweredge not getting past loading bios drivers

Dell poweredge r360 is not getting past loading of BIOS drivers



3.1K Posts

November 27th, 2023 18:53

Hello ten tazvitya,


Could you verify your server model?

Is it a Precision 360?


The first thing I would recommend is to drain the flea power and try to power up normally

drain flea power (shut down, disconnect power cables and Network cables, hold in power button 20 seconds with cords removed). After flea power drain, system has to set for 3 minutes for DRAC to reset without any power plugged in, then plug in NIC and power but wait 2 minutes before power on to give DRAC time to initialize.


No Events found!