Unsolved
This post is more than 5 years old
1 Rookie
•
1 Message
0
6971
November 29th, 2018 23:00
DELL PowerEdge R510 iDrac Update
Hi, I want to update below server model iDrac firmware only. But not able to find right latest iDrac firmware. DELL PowerEdge R510 iDrac Please help to get this. Thanks.
No Events found!
DELL-Chris H
7 Practitioner
•
9.7K Posts
•
48K Points
0
November 30th, 2018 07:00
Suraj Karande,
You can run the iDRAC6_2.91_A00_FW_IMG.exe version found here. After running you will see a file named firmimg.d6, you can use that to update from the iDrac web interface, as seen here.
Hope this helps.
AMERO911
1 Message
0
September 21st, 2020 13:00
i need help!!please
my server
bios 1.14.0
iDrac 1.80 (Build 17
DELL-Shine K
6 Operator
•
3K Posts
0
September 21st, 2020 18:00
Can you reboot iDRAC and try again. Your current iDRAC firmware is very old. Hence I also suggest to try some intermediate firmware instead of directly updating from 1.80 to 2.92 version.
If above did not worked you can try iDRAC6_2.92_A00_FW_IMG.exe file. This is a self extractable file. Once extracted you will get firmimg.d6 file and this file can be used in iDRAC GUI to update iDRAC firmware.
Fmslick
1 Rookie
•
11 Posts
0
June 19th, 2021 20:00
I would like to add there is a error with the Linux copy of this. https://www.dell.com/support/home/en-us/product-support/product/poweredge-r510/drivers
/tmp/PER510_IDRAC6_FRMW_LX_R239776.BIN-15965-4177/spsetup.sh: line 124: source: buildVer.sh: file not found
DELL-Joey C
Moderator
•
4.2K Posts
•
21K Points
0
June 20th, 2021 21:00
Hi,
Could you check your current iDRAC version? PER510_IDRAC6_FRMW_LX_R239776.BIN seems to be a very old version.
You can check it here: https://dell.to/3gJOeIG