Memory configuration for each processor should be identical. When you have 5 memory risers one of the processor have 2 risers where other 3 processor have only one riser. This could be the reason for warning. You can keep risers on slot A,C,E and G and see whether you are getting the warning message.
you can get more details for R910 memory configuration from below link (Refer section "System Memory" on page 91)
DELL-Shine K
4 Operator
•
3K Posts
0
January 17th, 2021 20:00
Memory configuration for each processor should be identical. When you have 5 memory risers one of the processor have 2 risers where other 3 processor have only one riser. This could be the reason for warning. You can keep risers on slot A,C,E and G and see whether you are getting the warning message.
you can get more details for R910 memory configuration from below link (Refer section "System Memory" on page 91)
https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r910_owner%27s-manual_en-us.pdf