4 Posts
0
1326
October 27th, 2021 08:00
iDRAC7 - OID networkDeviceConnectionStatus missing
Hi,
After an upgrade of Firmware and BIOS of all components from a R720, the SNMP OID .1.3.6.1.4.1.674.10892.5.4.1100.90.1.4 (networkDeviceConnectionStatus) does not work anymore.
The other OID .1.3.6.1.4.1.674.10892.5.4.1100.90.1. does still work as aspected.
The iDRAC7 firmware is 2.65.65.65.
Is this a already known bug and will it be fixed next version?
Regards
0 events found
No Events found!
Dell-Martin S
Moderator
•
3.6K Posts
•
7 Points
0
October 28th, 2021 02:00
Hello,
we don't have a known issue related to this in our knowledge base.
You can see here the possible values to SNMP
https://dell.to/3vW49tl
Can you try to reset idrac using this procedure?
https://dell.to/3CzyNes
Thanks
Tantony
4 Posts
0
October 27th, 2021 08:00
There is an additional problem with the SNMP OID .1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.38 ( controllerComponentStatus).
After the installation of the Firmware and BIOS updates, the SNMP query know gives "unknown (2)" back.
Tantony
4 Posts
0
October 28th, 2021 06:00
Hi,
I got the OID from the MIB https://www.dell.com/support/home/de-at/drivers/driversdetails?driverid=96cdj&oscode=wst14&productcode=poweredge-r720
The included readme_mibs.txt states, that DELL-RAC-MIB.txt is deprecated and iDRAC-SMIv%.mib should used instead for iDRAC 7 and newer.
Anyway, the iDRAC reset did the trick and now i can also query this OID again.
Very strange problem....
Thank you for the tip!