Unsolved
This post is more than 5 years old
2 Intern
•
50 Posts
0
1150
November 4th, 2012 06:00
RP 3.5P02 with Vmware
I get errors on the RPA logs on the Vmware CG
Splitter write may have failed (while group was transferring data). Problem has been corrected
No Events found!
forshr
2 Intern
•
1.1K Posts
0
November 4th, 2012 13:00
Hi Moshe,
It is acceptable to see these errors several times a day. These events are caused by I/O cancellation with the application VMware SCSI command abort/SCSI retry. The splitter initiated a write operation and then receives a cancel I/O from the host The splitter must cancel the write to RecoverPoint to prevent data inconsistency and it informs the user of this operation.
If the events appear too frequently (for example more than five times a day) they should be investigated further.
Richard Forshaw
Principal Corporate Systems Engineer - RecoverPoint (EMEA)
Data Mobility Business Unit - Enterprise Storage Division
EMC2 Computer Systems (UK) Ltd
sureshacs
1 Rookie
•
95 Posts
0
November 29th, 2012 15:00
Does your RPA show any slow connection messages and error? like fiber patch cable or wan connection ? check on the arrays to see if any of your hosts HBA's for any errors , if any hba is not logged in due to bad cable or some thing you might see similar errors...
forshr
2 Intern
•
1.1K Posts
0
November 30th, 2012 02:00
This sounds like another known message. Can you send the message details.
skopparthi
2 Posts
0
September 15th, 2015 08:00
Below is the error,
Summary: Splitter write may have failed (while group was transferring data). Problem has been corrected
Out of 9 luns These write failure are occurring for three luns
Please advice