Cannot Unbind MirrorView LUN??

Question

Hi, I am attempting to remove a MirrorView LUN. The mirror between the remote and the local system is broken. The LUN is not part of the Reserved LUN Pool or in any storage group. When I attempt to remove the LUN I am not able to do this. Is there anyway that this LUN can be removed? $ naviseccli -h vnx2 getlun -messner 11 -stack Listed Driver: K10SnapCopyAdmin $ naviseccli -h vnx2 unbind -messner 11 Unbinding a LUN will cause all data stored on that LUN to be lost. Unbind LUN 11  (y/n)? y Error: unbind command failed Error returned from Agent SP A: Cannot unbind a SSLUN while it has SCLUNs defined (0x71008015) naviseccli -h vnx2 unbind 11 Error: unbind command failed Being used by a feature of the storage system. Cannot unbind LUN: 11

man_mountain · Answer

yes the source/target relationship is fractured so the secodnary LUN was not removed from the mirror pair. Is it possible to remove the source LUN now if target LUN was not removed?

dynamox · Answer

is source <> target relationship fractured or did you actually remove secondary LUN from the mirror pair ?

dynamox · Answer

what happened to target LUN ? Is that array gone ?

man_mountain · Answer

No I suppose the array is not gone but the mirror is fractured and there is no IP network connection between the arrays.

dynamox · Answer

what happens if you try to remove secondary mirror. I am just curious if you can 'gracefully' clean this up or if it's going to require support involvement.

Replication Manager

Was this post helpful?