UNSOLVED
iSCSI and SAN Copy
After upgrading to a CX4 I switched to using iSCSI instead of FCIP (preparing for new fabric that doesn't have FCIP). The replication appears to be working fine but I keep getting these messages:
000613 ERROR: Invalid SAN Copy configuration. Verify that at least one port from SP A of SAN Copy storage system APMxxxxxx49 is zoned to at least one port from SP A of array APMxxxxxx13. And that the port from the SAN Copy storage system is connected to the SAN Copy storage group.
Anyone else deal with this?
Thanks
Dan
Marcelino_Torre
8 Posts
163
0
Posted December 21st, 2011 21:00
Hi Dan,
I get an error like yours don't have it in hand now, but i discover that the luns that i'm trying to san copy was less than the size of the original and gave that error.
May this helps.
Regards
Gfontaine1
1 Message
163
0
Posted February 18th, 2011 04:00
Hi Dan,
I've exactly the same messages in my Replication Manager Logs when a job is running, but the iSCSI configuration is fine because all my jobs (and my incremental/full sessions SAN Copy) or good.
If don't have found any subject on this error, but I'm happy to see that : I'm not alone now
It's not a problem for my jobs so..
If I have news I come back to you,
Bye,
Godefroy.