Replication Manager config checker VNX issue

Question

Hi all, I have installed new VNX block OE 5.32 and also updated RM to 5.4. SP2. Beside that RM does not list the admsnap 2.32 and NAVIcli 7.32 as currently supported (although FLARE 32 requires them) the RM config chekcer cannot retrieve the OS/enabler versions from the VNX. ---------------------------------------------------------------------- ... Test: NAVISPHERE_FLARE_RELEASEResult: FAILDescription: CLARiiON Array(s) found which do not have sufficient release of CLARiiON software.Detail: Array CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252 is at release unknown which is not sufficientRemedy: All arrays must have one of the following releases: 19,22,24,26,28,29,30,31 Test: NAVISPHERE_SYMAPI_COMPATIBLEResult: UNKNOWNDescription: Could not verify SYMAPI Version for all arraysDetail: Array CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252 is at release unknown but we do not know which SYMAPI version is required Test: NAVISPHERE_FLARE_OPERATING_ENVIRONMENTResult: FAILDescription: CLARiiON Array(s) found with missing or insufficient version of FLARE-Operating-EnvironmentDetail: Array(CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252) is at release unknown which is not sufficientRemedy: The required revision of Navisphere must be installed on the indicated arrays Test: NAVISPHERE_ENABLER_ACCESSLOGIXResult: FAILDescription: CLARiiON Array(s) found with missing or insufficient version of Navisphere Access Logix Enabler/Navisphere Access Logic OptionDetail: Array(CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252) is at release unknown which is not sufficientRemedy: The required revision of Navisphere must be installed on the indicated arrays Test: NAVISPHERE_ENABLER_MANAGERResult: FAILDescription: CLARiiON Array(s) found with missing or insufficient version of Navisphere Manager EnablerDetail: Array(CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252) is at release unknown which is not sufficientRemedy: The required revision of Navisphere must be installed on the indicated arrays Test: NAVISPHERE_ENABLER_SNAPVIEWResult: FAILDescription: CLARiiON Array(s) found with missing or insufficient version of Navisphere Snap View EnablerDetail: Array(CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252) is at release unknown which is not sufficientRemedy: The required revision of Navisphere must be installed on the indicated arrays Test: NAVISPHERE_ENABLER_SANCOPYResult: UNKNOWNDescription: CLARiiON Array(s) found with missing or insufficient version of Navisphere SanCopy EnablerDetail: Array(CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252) is at release unknown which is not sufficientRemedy: The required revision of Navisphere must be installed on the indicated arrays if you wish to use this feature ======================================== Subsystem: CLARIIONSETUPDescription: Checking CLARiiON setup... Test: NAVISPHERE_CLICOMPATIBLEResult: FAILDescription: CLARiiON Array(s) found which are not compatible with the installed Navisphere CLI/Naviagent.Detail: Array CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252 is at release unknown which is newer than NaviSecCli release  installed on the clientRemedy: Client resident Navisphere software (Navisphere CLI/Naviagent/Admsnap) must be at a rev equal to, or one greater than the array release to support that array Test: NAVISPHERE_CLONES_ENABLEDResult: PASSDescription: All CLARiiON Arrays found with Clones EnabledDetail: Array(CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252) can create clones Test: SANCOPY_STORAGEGROUPResult: UNKNOWNDescription: CLARiiON Array(s) found without SANCopy storage group.  SANCopy operations to or from an array without the storage group defined may fail or run slowlyDetail: No SANCopy storage group found on Array( 10.254.131.251)Remedy: For best performance with SANCopy please ensure that SANCopy storage group (EMC RM SANCopy SG) is created on your CLARiiON arrays Test: NAVISPHERE_ALLOW_PROTECTED_RESTOREResult: FAILDescription: CLARiiON Array(s) found which do not have Protected Restore enabled.Detail: Array(CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252) does not have protected restore enabledRemedy: Protected Restore is optional, but recommended. Please enable Protected Restore on the CLARiiON arrays. Test: NAVISPHERE_CONNECTIVITYResult: FAILDescription: One or more CLARiiON connectivity records is not configured with correct failover type or is not visibleDetail: Connectivity setting on CLARiiON array CKM00110801774 SPa: 10.254.131.251, SPb: 10.254.131.252 has incorrect failover type.Remedy: Be sure all connec.... any clue on that?

AWurz · Accepted Answer

ok- seems config checker array check is still not released for VNX series ...

Manjeera · Answer

you sure its not released?

AWurz · Answer

it is stated in document EMC Replication Manager Administration Guide page 308 Note: Config checker array testing features are not supported for VNX

Replication Manager

Was this post helpful?