Unsolved

This post is more than 5 years old

33 Posts

508

June 19th, 2007 07:00

Snapview

I have configured a snap session with replication manager and mounted to the back up server.Can someone tell me how to end the session when my backup is completed?I am using backup exec:{

257 Posts

June 28th, 2007 05:00

Hi there McJim.

Very sorry for the delayed response. The snapshot is deleted on the Clariion when your replica expires or is deleted.

The sequence of events for snaps when using RM is the following

1) Create a clariion snap when running the job
2) When you mount the snap replica, RM will present and activiate the snap to the mount host.
3) You do whatever backup you like.
4) The RM mount job, depending on how it is configured in mount options will
either
a) unmount the replica after the backup completes
b) leave the replica mounted (snap stays active)

5) regardless of the mount options configured, but depending on your replica retention policy ;

time-based - your replica will expire in time - the snap is deleted

replica-based - when the maximum count of replicas is reached
the oldest replica (keep # replicas) will be deleted - the snap is deleted


Hope this helps
James.

33 Posts

July 11th, 2007 11:00

When I set the replica to expire in say an hour I get the following in the debug log

2007 07 11 14:24:21 (3384) IRD. INFO:Progress in ExpireReplicaSinglePhase phase is 0 percent. /*e*/
2007 07 11 14:24:21 (3384) IRD.
WARNING Checkpoint 1089 expired at 2007 07 11 14:01:04 but cannot expire since it is in the mounted state

257 Posts

July 12th, 2007 07:00

Jim,
Is the replica still mounted?
Do you enable the option to unmount the replica at the end of the job?

We cannot expire a mounted replica.
HTH
James.

33 Posts

July 12th, 2007 07:00

It is still mounted.If you click the unmount option it unmounts right away.I want to mount it to the backup server -this works Schedule a back up within the backup application.This works .The backup takes about 4 hours so say after 5 hours I want to expire and unmount.

257 Posts

July 16th, 2007 02:00

Hi Jim

You need to click the unmount option in the Mount Tab in the job properties.

Also, to ensure the replica unmounts AFTER the backup completes, you need to kick off the backup job by using the post-mount or backup script option in the job properties.


Just FYI - all times are based on RM Server host time - so if you have different times, take this into consideration for your timings.

Thanks
No Events found!

Top