Search

Posts

Search Results (7K)

Conversation Type :

Posts

Published Date :

Lifetime

Category

Most Recent
S

Community Accepted Solution

R240 2 Bay Cabled LFF server needing 2.5" Drive Tray adapter?

Hello, I have an R240 2 Bay LFF Server and I want to add 2 x 2.5" SATA Drives, but the 3.5" trays are too big. Do I need to add a type of 3.5" to 2.5" Tray adapters?  Can you please let me know how to make this work? I know that they're compatible.. just need them to fit.  Can you please

Question

13

2

0

Community Accepted Solution

T130 Hard drive update

We have a T130 Poweredge server that was installed in 2018, it has 2 x 1TB 7200 drives - I'm running a simple linux server which as it's own software raid which works for us fine. One of the HDD's has failed and I want to reinstall with 2 new disks, it has the Perc H330 raid controller, but I'm usi

Question

30

5

0

Community Accepted Solution

SNMP stopped working (timeout) after installing the iDRAC service module

One of our PowerEdge R650 has a failing power supply and while clicking through the iDRAC interface, I thought it was a good idea to install the iDRAC service module. After doing it via the virtual console, I no longer get any information via SNMP (port 161) from the server, so Grafana has no data a

Question

21

4

0

Community Accepted Solution

PowerEdge T630 issues, PERC S130 controller not showing up with CTRL-R, only the H330 controller, unable to delete /dev/md126

Initially the system was setup as RAID1 on the S130 with two SSDs. Removed the virtual disk and RAID. Individual disks show up with fdisk -l However there is a a /dev/md126 which appears to be the virtual drive. When pressing CTRL-R during boot only the H330 controller shows up. How does one remove

Question

24

2

0

Community Accepted Solution

Poweredge T150 3.5 to 2.5 braket

Hi, We have a T150 which contact x2 3.5 HDDs and would like to replace these with 2.5' SSDs. Can someone advise part no of the adapter required since this is a 3.5' chassis?

Question

13

1

0

Community Accepted Solution

Replacing the backplane of T630

I have a DELL T630 8X3.5 server, and recently I acquired a 12 bay backplane (X4V7W/ 0X4V7W) from a T620 server. I plan to install this backplane into my T630 server, I'm not sure if it will work properly? I checked the dimensions, and it seems compatible. Moreover, the signal cables that come with t

Question

49

4

0

Community Accepted Solution

Poweredge T140 with PERC H330 Adapter

Hi there. I have the server in the title and i need more space. I have installed 2 more SSD. Tell me what i need to do? First i need to convert them to RAID? When i try to convert them idrac inform me: " RAC0516: Converting physical disk drives to RAID-compatible will overwrite any OS-created

Question

19

1

0

Community Accepted Solution

DELL PowerEdge R840 - hangs on BIOS screen

Dear experts, I powered down my DELL PowerEdge R840, moved it into another rack and started it up. Unfortunately the server now hangs on the BIOS screen. I press F2 on boot, but cannot get into the BIOS setup. I've tried restarting. At start a light blinks orange. But after some time the light

Question

39

2

0

Community Accepted Solution

Dell H710P Mini - Max Drive Size?

Hello everyone,I am using a Dell R720(8Bays 3.5sata) server which is running Raid (Dell Perc h710p mini). I want to ask this raid card, how many TB maximum capacity does it support? I can’t find any solid documentation on the largest size of drives these support, Can anyone help me? thanks

Question

20

2

0

Community Accepted Solution

PowerEdge R740 H740p Firmware.

Hi to all maybe there's some one that still have the firmware for the PERC controller H740p mini 50.5.0-2819 or later, since in page of dell drivers is no longer available. And I have a f/w is in fault state - MFI register state 0xF0010002 Thanks for the help. Regards,

Question

25

7

0

Community Accepted Solution

Widget Firmware not work.

Hello, The widget "Firmware" doesn´t works anymore. The overlay for selection your baseline comes up but it redirects back to the frontpage when selecting the one. Firmware wiget always takes you back to the main page Why Firmware widget not works? How to fix

Question

23

3

0

Community Accepted Solution

PowerEdge R650xs Windows server 2022 Device Not Available PNP device ID ACPI\INTL0000\2&DABA3FF&0 driver are not installed

Base on windows "System Information" under Components>Storage>Problem Devices- Device not Available PNP device ID ACPI\INTL0000\2&DABA3FF&0 driver are not installed But when I validate through Device manager there are no issues on the drivers. Next step to troubleshoot ? or I can d

Question

23

1

0

Community Accepted Solution

Adding a physical drive to my raid 5

I have added an additional physical disk my PowerEdge 650 server.After the disk was ready i logged into the IDRAC and added it to the existing raid and started the reconstruction which took about 24 hours to complete fully.The drive is now showing to be part of the raid 5 and the size of the raid on

Question

50

1

0

Community Accepted Solution

Building an Template for IDRAC Settings - SSH disable & SNMP , but no SSH disable Option available .

Hello , I have to disable SSH on all of my Dell IDRACs because of Security Reasons . I also want to configure SNMP with our Community String . I created an Template to rollout to al IDRACS so that SNMP become enable and also shows our Community String .  That works fine and i can choo

Question

38

1

0

Community Accepted Solution

Replaced failed main board - how to transfer iDRAC licence

Hi, I have a server with a failed main board, I bought a replacement (ebay) which doesn't have an iDRAC enterprise licence.  How can I transfer the licence from the failed board to the new (used) board? Thanks in advance.

Question

42

2

0

Community Accepted Solution

Unsupported DIMMs From The System

Hello, I recently bought a DELL PowerEdge T140 server, which didn't come with RAM. Consequently, I had to buy RAM separately. The RAM I chose is the KTD-PE426D8/16G, which is a DDR4 2666MT/s ECC Registered DIMM, and should be compatible with my server as per the manual. Despite this, the server won'

Question

52

1

0

Community Accepted Solution

New OME-User after Discovery on iDRAC-Board

Hello together, I am asking for a friend...After we have discovered a new server with OME 4.1.0, a new user (OME_29fbxxxxx) with the Administrator user role appears on the iDRAC board under the local users. So far we have no idea how this is generated and why. We have only been using this latest OME

Question

31

1

0

Community Accepted Solution

System Has Critical Issues

Hello everyone, I am seeing Health Information on the IDRac interface of the PowerEdge R750XS rack server I recently built. The server is working fine, but I don't know what this error means.  [DELETED because of sensitive Informations]

Question

30

1

0

Community Accepted Solution

PowerEdge R320 iDRAC failed - Work around?

PowerEdge R320s can take a special module for the iDRAC. It is my understanding that without that iDRAC module physically installed, the machine is only running basic management.Is the basic management a chip on the motherboard that can fail, and assuming that it can and it has, if you were to insta

Question

19

1

0

Community Accepted Solution

Source appliance not ready (not in MAINTENANCE state). 'Migrate Out' steps 2 and 3 must be completed on the source appliance.

So did not find anything on the board that helpt with this error. Fresh 4.1 ovf againt an updated 3.10.2 (build 13) And afer multiple tries keep this error Source appliance not ready (not in MAINTENANCE state). 'Migrate Out' steps 2 and 3 must be completed on the source appliance. Needless to say

Question

35

1

0

Dell Support Results

No Results found!

Top