Search Results (60)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello! Is there some way i can list (from the M1000 CMC cmd line) which slot/blade has which iDrac IP? I mean, i can "deploy" a blade/slot from the CMC cmd line, but i cant find a cmd that lists blade-IPs?! There must be some, right? wbr / Alex
Question
•
Blades
Community Accepted Solution
Hi, can we change the Service tag on M1000E Chassis blade Switch model MK8024.
Question
•
Blades
Community Accepted Solution
QLogic 57840S 10Gb Quad Port KR CNA bNDC Blade m620 bNDC part number JNK9N runing fine on M1000e chassis. Adding new M640 blades with "QLogic 57840S 10Gb Quad Port KR CNA bNDC" part number XV66X looks like up an connected to force10 MXL on fabric A when looking to port status on MXL switches but no
Question
•
Blades
Community Accepted Solution
Hello! MXG610s already have fos 8.1.0 version, we would like upgrade firmware to 8.2.x. Anyone know where we can download latest fos for this switch? In fos 8.2.2b we cant find HW Type 175.52.
Question
•
Blades
Community Accepted Solution
Greetings, all. I purchased a Dell PowerEdge M630 blade server that supposedly can support PCIe SSDs (ExpressFlash / NVMe U.2 SSDs), but knowing it wasn't shipping with the correct backplane. I purchased a M630 PCIe backplane and am having issues physically connecting it to the motherboard. It looks
Question
•
Blades
Community Accepted Solution
Could anyone please provide part numbers, or a guide showing the part numbers of the plugin modules for FlexIO bays in the M6220? I've looked through a ton of manuals that show pictures of the optional plugins, but I can't find the part numbers or ordering information anywhere. Thanks, Brian
Question
•
Blades
Community Accepted Solution
Hi, I'm looking at upgrading a M1000e chassis with M640 blades. Does anyone have any good documentation on the upgrade process and order.....and any gotchas and/or potential issues We also use openmanage so I assume this should get upgraded first? thanks
Question
•
Blades
Community Accepted Solution
Good day for all! I have MX7000 system with two MX740c blades.They all have latest firmware installed. OMM Version 1.10.10 (Build A00.726). I'm facing strange behavior when trying to create profile for sled. It has 2 mezzanine cards, one is QLogic 2x25GE QL41262HMKR CNA and another is QME2742 FC m
Question
•
Blades
Community Accepted Solution
Hi, I'm having some trouble with the video breakout cable on my C5000 chassis that has the C5220 blades installed inside. I can't seem to find the part number for the breakout cable to replace it. Any assistance would be much appreciated. Thanks!
Question
•
Blades
Community Accepted Solution
Hello team, how do we reset the MX7000 root account?
Question
•
Blades
Community Accepted Solution
Hi, I recently acquired some C5000 chassis with 12 of the C5220 blades installed. I was trying to find the iDRAC and couldn't find any information on it and can't seem to locate it inside the blades. If anyone could assist with figuring out what the iDRAC in these systems are, I'd be very grateful
Question
•
Blades
Community Accepted Solution
HI, I am having an FX2s Chassis. I am trying to bind FX2s Chassis with AD using Standard schema. there is no certificate configured in the environment. BUt i am getting an error while trying to test configuration. The test results are listed below. Test Results[check]: (system) Verify need
Question
•
Blades
Community Accepted Solution
Are there any updateed stencils of MX-7000 series ?
Question
•
Blades
Community Accepted Solution
Trying to upload new iDrac 2.63.60.62 to a M620 Gen12 through CMC 6.1 but it's taking too long to complete .. it has past 30min and only 10% upload... Anyone having this same issue? I'm using 6.1 for at least 6 months, and this is the first time updating iDrac firmwares that causes this issue..when
Question
•
Blades
Community Accepted Solution
Hello, I have to update the BIOS of my two R430 before going from esx 6.0 to esx 6.7 U1. My question is : Can I take the .exe (which is available for Windows in the drop down list at Dell) and do it directly from the iDRAC GUI ? or do i need to use .BIN or .EFI and put it on a USB or CD as it's only
Question
•
Blades
Community Accepted Solution
only one blade server M640 powers up. If I need to power up the server on slot 1 I need to power off the sever on slot 2 and vice versa. Is there any solution to this..?
Question
•
Blades
Community Accepted Solution
hardware : m1000e, network A1 - Gigabit Ethernet Dell Ethernet Pass-Through B2 - 10 GbE (XAUI Only) DELL 10GbE XAUI PTM blades m620 with Broadcom 57710 mezzanin on slot b i have configured the m1000 and successfully installed proxmox os on the blade. but only the a1 network is workin
Question
•
Blades
Community Accepted Solution
FX2 has two FN2210 IOMS in chassis. Everything is at factory default in standalone mode. The two IOMs have two mgmt IPs. First, I noticed that management IP availability is very hectic. SSH cut suddenly, http loads then timeouts, ping is like 60% loss. Later I found that if only one IOM is connected
Question
•
Blades
Community Accepted Solution
Hey folks, My CMC is behaving a little oddly. We've recently reconfigured switches in one of our M1000e, and were making some minor changes just to apply labels to ports. Mid session, the CMC session kicked the engineer out, and we now can't get into ANY of the six M8024-K switches in the unit.
Question
•
Blades
Community Accepted Solution
Hello Everyone, I have huge problems with Dell VRTX. We have 4 nodes installed with vSphere 6.5 in VRTX Chassis. We have already configured 4 servers with one Datastore which is taking from Virtual Disk of VRTX. Then, we have shutdown 4 servers and took out them to move physically to another site.
Question
•
Blades