Search

Posts

Search Results (60)

Conversation Type :

Posts

Published Date :

Lifetime

Category

Most Recent

Community Accepted Solution

Dell PowerEdge M1000e

Dear all, i have dell PowerEdge M1000e chassis with 8 PowerEdgeM610 and 8 PowerEdgeM610 so i have updated he firmware to 9 610 but not all . My queries are :- 1)PowerEdgeM610 is giving health error critical but everything is working fine on the server i have cleared lo

Question

3.9K

3

0

0

Community Accepted Solution

Broadcom BCM5720 Firmware Update Issues on M520 (VRTX)

I'm having issues updating the Broadcom BCM5720 4-port NIC firmware on two PowerEdge M520 (VRTX) servers. All other firmware components on both the M520's and VRTX were upgraded successfully. It seems that each individual NIC port is updated during the firmware update, but in my case I can only get

Question

4.7K

4

0

0

Community Accepted Solution

New M630 Blade installation and fabric i/o slot assignment

Hi, We have an M1000e chassis and 4 existing M620 blades, im adding two new m630 blades and after completing the required chassis firmware updates and installing windows the status of the Intel x520 10GbE dual port KX4-KR Mezz only displays as 1Gb as the connection speed. When looking at the fabri

Question

6.3K

3

0

0

Community Accepted Solution

M1000e fabrics - M6220 switches and Passthrough interfaces?

Hi All I have an M1000e with 4 x M6220 switches available, and I also have 2 x passthrough modules available. I have 3 x M710 FH blades with fab A,B and C .  I also have 5 x M905 FH Blades with only Fab A and B.  Would it be ok to use the Passthrough modules in Fab B1 and B2 and the swit

Question

1.3K

1

0

0

Community Accepted Solution

M420 Blades - How to maximize RAM?

I've got 6 of these in production now, and have suffered one DIMM failure so far. I am looking at purchasing 4 more with maximum RAM (192G).  Using the on line configurator I am told that: The M420 Blade supports a maximum of three (3) DIMMs with one CPU or six (6) DIMMs with two CPUs. In o

Question

32.8K

1

0

0

Community Accepted Solution

Multiple New M630 Blades in chassis are having CPU 1 errors.

We have a new chassis we are setting up that is populated with new M630 blades. Several of the servers are having errors.  They have Windows 2012 R2 installed and if we restart them we get these errors.  We can reseat the blade and start the server and no errors.  But once we restart

Question

85.9K

1

0

0

Community Accepted Solution

Unable to change root / calvin credientials

Hello, I recently brought a new m1000e chassis online with two cmc's running 4.5 firmware. When I initially connected to the CMC it prompted me to change the default password, which I successfully did.  Now I am seeing some very strange behavior.  I am able to login with BOTH root / calv

Question

76.1K

15

0

0

Community Accepted Solution

blade physically stuck in m1000e chassis

Hello, This sounds silly but I'm literally stuck. I tried to remove a brand new M620 blade from our chassis but the handle only came out a bit on the upper side. The handle is stuck at the down side and it's impossible to remove the blade. I tried pulling as hard as I dared. Now I can pull the upp

Question

28K

1

0

0

Community Accepted Solution

IOM firmware on m6348 switch failed, fabric mismatch

On updating IOM firmware 2 out of 4 m6348 failed to update and now report fabric mismatch. I have tried the update process again and reseating them.  They won't even power on in the enclosure to access the console, is there any way to recover them?

Question

36.7K

3

0

0

Community Accepted Solution

M1000e with M610 Blade. iDRAC6 issues with upgrading firmware to 3.50 (Build 4) - "The uploaded image has failed verification" Error

I have blade that is an M610. its current iDRAC6 Firmware version is 3.30 (Build 17), its BIOS version is 6.0.7. I am trying to upgrade the iDRAC firmware upto version 3.50 (Build 4). I am upradging through the CMC on the M1000e chassis. I choose the slot the Blade is in and then Launch the IDRAC GU

Question

196.9K

11

0

Community Accepted Solution

Updating iDRAC firmware for M600 with image

I am in need of updating server iDRAC card's firmware to 1.65 and the ways to do so now are updates which require you to run them on the host OS which has to be windows or Linux. I have two servers which do not have OS's on them so I can not update in this manner and it is silly for me to install or

Question

107.4K

7

0

0

Community Accepted Solution

Dell C6100 Question

I read the information that you had with a previous customer regarding the C6100 and found it very useful.  I was wondering if you could answer more questions for me. I am considering buying one of these.  My purpose is going to be different then what is intended for.  i would l

Question

37.1K

4

0

0

Community Accepted Solution

A fabric mismatch detected for mezzanine card C

Hi, We have blade chassis M1000e with passthru modules "DELL 10GbE XAUI PTM" and several working M710 blades with "Intel 10GbE/FCoE Dual KR X-520" NICs in fabric C. Now two new M620 blades with "BRCM 10GbE 2P 57810S-k Mezz" NICs in fabric C were installed into chassis, and I am unable to power the

Question

183.6K

1

0

0

Community Accepted Solution

Reset iDRAC Web GUI on M600

Hi, I'm having issues accessing the iDRAC web gui on a couple of M600 blades (needed to get console and re-install the OS). I've read on Google that running racadm racreset may fix the issue, but this appear to only be available on m610's? When I ssh into the M600 blade I'm given a SMASH-CLP Cons

Question

293.4K

3

0

0

Community Accepted Solution

M620 I/O CARDS

Hello,We have a client and he would like to purchase two new M620 blade servers with the following configuration:Fabric A - 57810S Broadcom NDCFabric B - 57810S Broadcom NIC Fabric C - Qlogic QME2572Until then, he has the following configuration of I/O Modules:Fabric A - PowerConnect M6220 x2Fabric

Question

36.6K

4

0

0

Community Accepted Solution

Updating iDRAC firmware of M600

All, At this moment I'm trying to update the firmware of 8 iDRAC interface via iDRAC webinterface and via CMC interface, unfortunately it doesn't work. On our M600 we are running Xenserver. From DELL Enterprise support I get .exe files to upload, but then I get an error while updating firmware t

Question

132.8K

6

0

0

Community Accepted Solution

M1000e Midplane error on M620.

I recently added a few M620's to a few of my chassis that previously only had m710HD's one of my chassis gave this error in the CMC on this server " Component performance can improve if it is installed in another chassis that has a newer midplane, or if the current chassis is upgraded; the current

Question

210.5K

8

0

0

Community Accepted Solution

problem with M1000e chassis

Hi, I'm new to Dell blades. We received a Dell M1000e blade chassis with 8 M600 blades that I'm setting up for a test environment. It has 2 of the blades installed at this moment. When I power on the chassis the display only says: "Enclosure Management initializing..." and the the LED is blinking

Question

24.1K

1

0

0

Community Accepted Solution

Dell PowerEdge M910 and Vmware Networking

hi guys I have a Blade chassis with 3 PowerEdge M910, this chassis has 8 Physical NICs connnected and each ESX 4.1 sees 10 vmnics, according to my networking guy these 8 NICs are using Etherchannels and all these Etherchannel have access to al VLANs in my case VLANs 40 - 50 - 700 - 800. OK, I have

Question

19.1K

3

0

0

Community Accepted Solution

Dell Perc 4/SC drivers for Server 2003 32-bit

Can anyone provide the location for this RAID controller!? You would think it wouldn't be THAT hard to find but for the life of me I haven't been able to hunt this driver down!  I've found the driver for 64-bit I've even found it for Server 2000 everything but what I need!    HEELL

Question

20.8K

5

0

0

Dell Support Results

No Results found!

Top