Search Results (1.6K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
ARUBAhttps://community.arubanetworks.com/browse/articles/blogviewer?blogkey=43d22d8b-02f5-4e5b-ba1d-4ce9096bf7c4I wanna ask1. what is similar function of it in Force102. if Aruba side is L4 and Force10 side is L3 trunkwill L4 talk to L33. which switch model and os version support that tq
Question
•
Networking General
Community Accepted Solution
Just wanted to check, if i needed to "reboot" the switch from the CLI what command do i use? Looking at the available command "reload" looks the closest but don't want that to "factory rest" the thing.
Question
•
Networking General
Community Accepted Solution
Hi, I have 2 switches peered with VLT. VLT port channel 10 (LACP) is configured to Storage Node with physical links to the 2 switches. 2 physical trunk links from the 2 switches (not port-channel) configured to Host A running on hyper-v (Nic teaming mode on switch independent). When one of the
Question
•
Networking General
Community Accepted Solution
Hi, I got a used M1000e chassis. Everything works fine, except that the blades don't have network access. The chassis has two Cisco Nexus B22 FEX switches, and I think I must configure the switch, but if I try to connect to it, it fails: $ racadm connect -m switch-1connect: switch-1 does not supp
Question
•
Networking General
Community Accepted Solution
I just started with my new company. An issue we are having is we have multiple Dell n3048p switches that were working fine until a power outage occurred a week or so ago. Now there are groups of ports that no longer light up. They have cables plugged in and another tech attempted t
Question
•
Networking General
Community Accepted Solution
hello. I started the DHCP server in OS10, but the IP is not being assigned from the client. Running a DHCP server on OS9 will assign IPs to clients normally. Are there any additional commands I need to enter on OS10? OS10 version is 10.5.2.0. The settings for server and client in OS10 are as f
Question
•
Networking General
Community Accepted Solution
Hi Dell Technician, I have a serious incident when upgrade OS Switch Dell S6000. This is not platform Open Networking (ON), Just S6000; so there is no ONIE interface. I only see the BIOS interface (when press F2) and BLI Mode (when press ESC) First I upgrade OS from 9.10.0.1P3 to 9.14.2.8, during
Question
•
Networking General
Community Accepted Solution
I'm replacing an HP 2920-48G with LAG configured with a S3148p and I'm trying to LAG/LACP ports 1 and 2 of the S3148p to connect to a Dell S4048T-ON. On an HP switch, which I'm familiar working with, creating a LAG is just a couple of mouse clicks. On the Dell S3148p, which I'm not familiar with, i
Question
•
Networking General
Community Accepted Solution
Hi everyone, I'm preparing for the deployment of Dell S4810-ON switches as ToR switches in the data center. I was going through the specsheet of the product here: https://www.dell.com/learn/us/en/15/shared-content~data-sheets~en/documents~dell_networking_s4810-on_spec_sheet.pdf Which said: "The D
Question
•
Networking General
Community Accepted Solution
Use case: Cross connecting 2 of these adapters in R7525 servers for iSCSI software san. I understand cabling is a finicky thing with this type of device. Trying to confirm a part number for DAC cables ebtweebn two of these Dell/Mellanox ConnectX-6 DX QSFP56 adapters. QSFP28 seems to be fine and wi
Question
•
Networking General
Community Accepted Solution
We have an Dell VxRail E670 with Intel X710 10G SFP+ NIC card and has been supplied with Dell DAC Cables and considering the delay in delivery of Dell Switches we would like to have this connected with our existing HP Switch A5820X. We would like to know if this would work or would there be any iss
Question
•
Networking General
Community Accepted Solution
Is there any source for the CPLD 9 update firmware for a Dell Force10 S4810P? The FTOS updates are available for download and the bootloader I have, but no luck on CPLD. Any help is much appreciated. --Jay
Question
•
Networking General
Community Accepted Solution
Hello. I have a central switch model Dell S4048-ON with a few vlans created. One of them is the VLAN 111 used in a port-channel. Here is the configuration: ............... interface Port-channel 11description "Aula 11"no ip addressswitchportno shutdown.....interface Vlan 111descriptio
Question
•
Networking General
Community Accepted Solution
Hi, I have three N3000 switches(N3048*2, N3024P*1) and now I used stack for these switches, after configurated I found some of stack interface link status is down, how can I setup these link status to up? And "sh run:" Thanks.
Question
•
Networking General
Community Accepted Solution
Hello, can VLTi be configured on 2xS4128F-ON switches via the 10Gb Fiber ports (using 4*10Gb SFP+ baseT optics & CAT6a cables ) . i'm aware there are 2x QSFP28 ports, but i need to confirm whether the above request could be achieved without any performance or operation issues. Thanks in advan
Question
•
Networking General
Community Accepted Solution
Hi, Folks, I'm facing an issue with the DELL model S5048F that was recently updated. I can't access via SSH and I can't clear VTY sessions with the command "clear line vty x or clear line x"I ran the cleanup command but it doesn't remove vty line
Question
•
Networking General
Community Accepted Solution
Is it possible to do this on a port by port basis? I want to have jumbo frames configured on certain interfaces but not others. Is this a global only setting?
Question
•
Networking General
Community Accepted Solution
N4064 is the core switch with all VLANs. Core switch has a LAG set to trunk to N2000 switch and the lag is a member of all VLANs. The ports the core are attached to on the N2000 are a LAG set to general. For reasons beyond me, if I change the LAG on the N2000 series to trunk, I loose all management
Question
•
Networking General
Community Accepted Solution
Hola a todos; Algo raro pasa porque en los switches Dell N2024P que están instalados en mi infraestructura de red no puede hacer ping al core ni a la Vlan de administración la versión de firmware que tiene es la 6.3.3.14. ¿Alguna solución? Saludos
Question
•
Networking General
Community Accepted Solution
Hi, In my environment, we have 2x Spine switches peered with VLT, however it is running out of ports. Is there anyway we can add switches to the VLT domain just like stacked switches? Will mVLT (Multi-domain VLT) help in this case? Thank you.
Question
•
Networking General