Search

   We are setting up a connectrix manager that supports several sites for a customer.  Each site has its own esrs server but when we setup call home in connectrix manager it appears i can only have one EMC esrs call-home destination.  Is there a way around this or will we need to

Hello Community, We are integrating EMC2 ds5000-b switches with a customer server processing alarm traps and counters (if any). Does anyone know if there's any product document describing and listing alarms and counters? Are MIBs available for this product? Thanks in advance, daniele

Hello, I have a Emc ds-300b feature key. Now i want to upgrade the ports one of my SAN switches with its unique transaction key. but I couldn't find any place for converting it. i have used this address: https://licensing.emc.com/#/licenseConversion but it converts only for data domain OS. My SAN

Hello, I have a Emc ds-300b feature key. Now i want to upgrade the ports one of my SAN switches with its unique transaction key. but I couldn't find any place for converting it. i have used this address: https://licensing.emc.com/#/licenseConversion but it converts only for data domain OS. My SAN

Hi We are preparing for MDS 9706 upgrade and we want to do a proactive reboot, as the uptime is over 450 days. Could you help me to build the action plan for that, please? Review the path status via PowerPath to confirm redundancy. Check flogi database / port status. Save the runni

I have Brocade Switches 6505B running with 7.2.1d FOS Version. So I’m going to upgrade to target code 8.0.2d using below sequence upgrade path Steps:   7.2.1d -> 7.3.2b -> 7.4.1d -> 8.0.2d Before upgrading Target code FOS 8.0.2d,I was checking compatibility of HBA driver version

Hi There, I would like to know is there a way to collect performance stats from MDS switch (ver 6.13) or DCNM (ver 10) using CLI in 5 min intervals ? On the DCNM server there are RRD files which are storing perfomance data from my understanding. Converted them to XML file but couldn't understa

Bank of America is inquiring about this level of Cisco NX-OS. But it does not appear to be certified by Dell EMC yet. Will this version be certified, and if so is there an ETA of the GA date?

under the MDS directors I can see several names like information for device ID xyz "Tuscany-fw" or Aakash or Tuscany-que what are the names stands for the models are MDS 9509 and 9506

This might have already been answered. But, I have a UCS vBlock the switch has NPIV enabled and the FI on the UCS are NPV enabled. What I nned to do is enable another Cisco switch 9500 series outside the vBlock with NPIV and fport-channel to allow ports on the vBlock to connect to another VNX5600

I have my switch configured to use a RADIUS server for remote authentication. If I log in with a local user, I can prove the authentication to RADIUS works with the aaa test command. If I try to log in via Device Manager or Putty, remotely, it doesn't even try to use the RADIUS server. I can tell th

I have a cisco MDS 9710 switch with TACACS enabled. I am unable to logon using the admin account. Getting access denied. Tried resetting the password for the account but even then logon doesn't work. Could someone point out what is wrong.

When I am in CMCNE 14.3.1 in Discovery I receive the following message for the two virtual switches: Discovered: SNMP communication failed. SNMP Credentials may be invalid.: Seed Switch However when I increase the Time-out (sec) from 5 to 10 the message goes away and I get the green check inst

I have CMCNE 14.0.1 and trying to delete a switch/fabric config for a switch(DS-300B) that is powered off (flooded from Harvey) and CMCNE see's the Switch State as "On-line" but the Status is "Not Reachable". When I try to disable the switch thru CMCNE, it says "The switch xxx.xxx.xxx.xxx Disable Fa

The release notes for Version 14.3.1 state that only up to Windows Server 2012 R2 is supported as an operating system. I tried, but failed to install CMCNE 14.3.1 on Windows 2016. First attempt gave me this error message: Installer User Interface Mode Not Supported After trying to launch the se

All, We are planning to replace CISCO MDS 9513 switches with MDS 9396S on our two fabrics. These are the steps I have in mind. 1. Configure MDS 9396 and assign a domain id greater than the MDS 9513 2. connect console terminal 3.configure networking, ssh , zone set etc 4.Vsan configuration.

お客様の要件にPlatinum以上の取得が含まれており、情報を探しています。 DS-6505B、DS-6510B、DS-6610BおよびDS-6620Bは80PLUS規格のPlatinum認証を取得済でしょうか。 DS-6520Bについては、Haardware Reference Manual に「80+ Platinum Certified」と記載されていましたが その他のBrocade系製品に関しては、残念ながらドキュメントを見つけることができませんでした。。。

Hello, I am trying to change the snmp string to a RO public string on a pair of old brocade 300 switches running 7.0.4. Does anyone have any guidelines for this. My only option is using CLI. Thank you! Admingirl

I have lost InfoArchive xDB admin password, how to retrieve the password or change it?

Hi, We have 2 SAN Switch here Connectrix DS300 And Brocade 300, when i do licenshow, in connectrix i see "Fabric license,Enhanced Group Management license,8 Gig FC license' on brocade i see "8 Gig FC license". I Use FOS v6.4.3g, I cant find information about  "Fabric license"  descript