Search

What happened to the SMI-S download? I used to be able to search for support by product and type in SMI to find it but now that search returns nothing. I see Solutions Enabler was updated but the release notes didn't mention anything about SMI-S. Thanks.

Hello, We have a situation. Every lun but one migrated smoothly. This lun is 3TB. After migrating it, the lun looked healthy in the unisphere GUI, powerpath mgt on the windows side, and healthy in disk manger on the windows side. Yet, the windows admin is saying he cannot mount it or add it the c

Hi.. can I have difference between dmx 3 and dmx4 ?

I have a device group that is no longer need. I removed all the devices from the device group and deleted the device group. I unmasked and unmapped all the devices that were in the device group (Standard volumes and R1-BCV's).  Now I want to dissolve the R1/R2 relationship so I can reuse these

Are the older Symm arrays supported by SE 7.5? I'm installing SE 7.5.0.7 for Solaris (sparc) and now having trouble discovering my DMX-3 arrays. I was previously on 7.3.1.0.

how to use symmwin?

Hi, i know we have Flash , FC and SATA and they are grouped in disk groups . whats the CMD i can run in SYMCLI or in SMC to findout the Drive types. thanks

Hi All, Looking for some advice. We have 2 sets of fabrics(FAB-a/Fab-b) in one SAN and a fab-a/fab-b in the other. Straight forward setup i want an ESX host to FCR through to the other SAN to a DMX. fcping looks good i see on the fabric devices on both sides logged and good. The DMX picked up the W

Is VNX and VMAX 40K supported on ECC? Also is Isilon supported on ECC?

Hello I have some Questions about Gatekeepers Configuration required for SMC and ECC servers on vms I have installed SMC on a Windows 2008 vm and have converted the ECC windows 2003 server to vm ( P2V ) need to have all properties and options should be chosen for the rdms used for the 2 se

I am trying to dissolve some DMX 4 metas, but it is failing with "The STD device can not be manipulated because it is BCV attached to one or more BCV devices." The DGs have already been blown away. I know there is a way to put the STD and BCVs into a file and run a symcli cmd to remove the S

Is there any way to do either or both of the following: 1) Given a TDEV, which DATADEVs are being used? 2)  Given a DATADEV, which TDEVs are using it? I've got eight physical SATA disks that are "hot" right now.  The only thing they have in common are 22 RAID-6 data devices.  I'

Hi all, powermt display dev=all is showing one of the path is unlicenced as shown below and "emcpreg -list showing unable to open licence key file." how to licence the second path and how to change policy from BasicFailover to SO.? powermt display dev=all Pseudo name=emcpower2a Symmetrix

please find the attachment... can u please help me to find out why its coming so ??

What is VMAX10K VP best practice?

what is the command to find out the dse pool size ?? how can we increase the size ??

how the cache will be utilised in adaptive copy disk mode in srdf ???

Hi All, While mapping devices to FA's same available lun address has to be taken on both direcotor's or we can take anything. on director 10A port 0 lun address "03F" is availabe,but it is not available on director 7A port 0. Can i take '03F' for director 10A port 0 and '08D' for director 7

What is the "NP" director bit settings meaning? As per Primus emc66020 If the NP (Non-participating) flag is enabled and the H-bit is set (H is on by default and not visible), the director uses only the hard address. If it cannot get this address, it re-initializes and changes its state to non

If the pipe and latency betwen sites are not factors, what is the max size a replicated striped meta can or should be, and please explain why. Specifically, what would be recommended for replication of a 3TB lun, with SRDF/S, for example.