Search Results (156)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Relevance
D630 memory and media bay options question
drive and a second battery for it's media
bay.
I'd like to know if the media bay devices are compatible with my D630.
also, there's 1GB of PC5300 memory in the D630 now. Would 2GB of PC4200 work
ok, and would it be an upgrade or a downgrade?
Thanks, Mike
Question
•
Desktops General - Locked Topics
No response time on the network after doing a loop back
On my network I have 12 PC. I have a central point with a PC5324 and several link with 53 24 or 33
24 or 3348.
Each link are independent like a star. I configure the switches with RSTP and be carreful about the fastlink
(no fastlink on an
Question
•
Networking General
Looking for any info. on 3 Ports Video Card
Looking for any info. on
Applied Imaging PC530 Multi Head
ISA 3 Ports Video Card.
Purchased on ebay (5164268094)
Question
•
Desktops General - Locked Topics
Memory for D600?
have read that it may have 2Gb of memory type: DDR SO-DIMM PC2700
200p
I guess that means 2 x 1Gb.
Can I use 2 x 1Gb of:
Kingston ValueR DDR2 SO-DIMM PC5300 1GB - CL5, Non-ECC, 1.8V, 128Mx64,
200pin
or will this cause problems?
Question
•
Laptops General - Locked Topics
GVRP config questions
Hello, I want to config GVRP on PC5324 and PC6224,I already enabled
the GVRP in globle mode and trunk port mode;
From online docs:
http://supportapj.dell.com/support/edocs/network/pc5212/sc/ug/pc5212ce.htm#1108305
Question
•
Networking General
Dimension C521 Graphic Card Upgrade
I have a Dimension C521 currently using an ATI X1300 256 MB PCIe
graphics card, taking into consideration that this is a low profile card, could
anyone recommend a reasonable upgrade. My system runs a AMD Athlon64 4400+ cpu,
4GB of PC5300 ram, 320 GB HDD, and a standard 280W PSU.
Question
•
Desktops General - Locked Topics
MY XPS 600 RAM
at the time)
and I have been very very happy with Corsair.
I'm looking at the new Corsair, and they have PC5200, PC5300, PC5400.
Which do I chose?
I tried using CPU-Z and Everest Home, but neither will tell me the Mhz
of my existing
Question
•
Desktops General - Locked Topics
Optiplex 745 Memory Error
to turn the system on. I verified they are in the right memory slots and
its weird because when I put my single channel 2gb chip back in, it works fine.
The ram i am trying to install is DDR2 PC5300 (667mhz) 4gb dual channel. Please
help !!!!
Thanks
Question
•
Desktops General - Locked Topics
Dell PowerEdge 850 memory issue
I just picked up a Dell PowerEdge 850 and 4 sticks of 2GB ECC RAM. They
are PC5300 and all the same. I swapped out the 1GB (2x 512mb RAM sticks) and
placed the new RAM in, and immediately get a 1-3-2 beep code.
I've taken them all out and just put 1 RAM stick in, same
Question
•
PowerEdge Hardware General
Just ordered my new computer.
verything is compitable whit eachother.
Asus P4PE/L/G D Mainboard 478/533, 333DDR.
Intel Pentium 4 2.4GHZ Boxed PC533.
Western Digital Caviar 80GB IDE 7200RPM 8MB Cache.
TwinMOS PC2700 DDR-DIMM 512MB CL2.
Suntek
Question
•
Desktops General - Locked Topics
Closed
Inspiron 1525 Memory Upgrade
I tried placing a 2GB DDR2 SODIMM PC5300/4200 (667/533MHz) stick into
my laptop and it did not work for long. The laptop origianlly came with two 1gb
sticks. I took one out and had replaced it with the 2gb stick above. It worked
for a little while but then the system would just keep
Question
•
Laptops General - Locked Topics
Need Help - Linking VLANs
Hi, I am using a PC5324.
I am trying to connect 2 or more VLANs using a "common port".
Example: I have created VLAN-1 on g1-g5 , VLAN-2 on g6-g10, VLAN-3 on g11-g16
How do I create : 1) port g17
Question
•
Networking General
Create a Vlan
is
Running AD with DHCP enabled. Address range is 10.0.0.1 - 10.0.0.254.
Subnet mask 255.255.255.0 ; Power connect swithces : PC5324 and PC6248
Issue : running out of IP's.
I am assuming that I have create subnets. If i create a new subnet how
do
Question
•
Networking General
PowerConnect 5324 Speed issues
I'm having some problems with the speed of the 5324.
I replaced an old 100mbit 3com hub with the PC5324 in our test room,
but now network speeds have dropped significantly. With the old hub I was able to pull a ghost image from a server with
Question
•
Networking General
2 GeForce 6800 in SLI mode vs 1 GeForce 9000 series
Hi,
I have an XPS 600, Pentium D 830, 2 GB PC5300 memory, one GeForce 6800
card. Would appreciate your opinions/answers to the following questions:
1. For significantly greater gaming performance (MS Flight Sim 2004),
should
Question
•
Desktops General - Locked Topics
XPS 600 with 4 gB Ram not detected
Hey I know this is all over the forums, but my case is alittle
different. I have 4GB of PC5300 @ 667 4X1GB chips. The bios detects all 4 of
the gigs yet when I run xp mce it only shows 2 gigs. I can live with the3 gig
issue everyone is having, but how can i physically see at least 3
Question
•
Desktops General - Locked Topics
memory will only work in DIMM B after upgrading memory dell d620
I had a 1 gb memory stick in DIMM A and a 512 Stick in dimm B pc4200
533. computer recognized them both fine. I got a new pc5300 2gb 667 stick when
i put it in DIMM A and the Exsisting 1gb stick in DIMM B the computer would not
boot up, just flasing lights in the cap locks for about 10
Question
•
Laptops General - Locked Topics
Dell Support Results
No Results found!