UNSOLVED

palominas

updated

20 years ago

P

palominas

17 Posts

0

15853

March 4th, 2007 18:00

Adding 2nd HD to Dimension E310

I have a Dimension E310 with a 160 GB Serial ATA  Hard Drive (7200RPM). Windows XP Media Edition.
 
I want to add a 250GB SATA drive and have a different operating system installed on it.
 
Is it possible to add the drive and configure BIOS so that it is not part of a RAID setup, and be able to boot from either one by changing the boot order in BIOS when needed?
 
I have BIOS v.A04
 
  • mombodog

    2 Intern

    •

    12735 Posts

    203

    0

    Posted March 4th, 2007 19:00

    Most Dells will only boot from a drive connected to sata port 0 only. You can add a sata PCI card, connect the drive to that, the sata card will show up in the boot order.
     
    Not sure about the raid question.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    203

    0

    Posted March 4th, 2007 23:00

    The 310 lacks RAID support, so that's not an issue. What will be an issue is that the 310 doesn't come with a bracket/shell for a second drive, so you'll need to order one of these from Dell (they're nonstandard, proprietary parts). Dell Spare Parts 1-800-449-3355 ext 7269937
  • GioAguilar

    2 Intern

    •

    1882 Posts

    203

    0

    Posted March 4th, 2007 23:00

    Well you can add the HDD you mentioned with no problem to the computer, just make sure you don't activate the RAID setting because if you do, you may lose all the info in there. So just plug the HDD and turn on the computer... Nothing else is needed
  • shesagordie

    12 Elder

    •

    46017 Posts

    203

    0

    Posted March 5th, 2007 00:00

    palominas

    You can buy a Dell OEM hard drive mounting tray for the E310 for $4.99 from here and a SATA data cable 24" or longer "Straight-to-Right Angle" will be required, like the unit shown here.


    Bev.






    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • palominas

    17 Posts

    203

    0

    Posted March 5th, 2007 04:00

    Thanks forum members for the information. I will get back if I have any problems or to say everything went well.
    Thanks again
  • palominas

    17 Posts

    203

    0

    Posted August 14th, 2007 06:00

    Has anyone had any experience with a SATA card and be willing to recommend a card for a Dimension E310. I have 1 PCI slot and 1 PCIx1 slot open for a SATA card. I am trying to install a 2nd hard drive and want to be able to boot from it. As I understand it I would not be able to boot from a 2nd drive that was plugged into the on board SATA. Thanks
  • mombodog

    2 Intern

    •

    12735 Posts

    203

    0

    Posted August 14th, 2007 12:00

    "As I understand it I would not be able to boot from a 2nd drive that was plugged into the on board SATA"
     
     
    If the bios recognizes the sata card, you can set the card as first boot device, then It will boot from the hard drive atteched to it..
     
    I recommend Promise or Siig brand cards.