Unsolved
This post is more than 5 years old
28 Posts
0
20537
January 3rd, 2008 09:00
disk space warning on D
i keep getting the low disk space warning for back up d.but i have done everything i can(i think) to clear space.removing hardly used programmes/disk defrag ect.but doesnt help,any advice would be gratefull.
No Events found!


BigBrother
2 Intern
•
4.8K Posts
0
January 3rd, 2008 15:00
tommyboy 21
28 Posts
0
January 3rd, 2008 18:00
BigBrother
2 Intern
•
4.8K Posts
0
January 3rd, 2008 18:00
tommyboy 21
28 Posts
0
January 3rd, 2008 18:00
C3PO5
2 Intern
•
2.7K Posts
0
January 3rd, 2008 18:00
tommyboy 21
28 Posts
0
January 3rd, 2008 19:00
tommyboy 21
28 Posts
0
January 3rd, 2008 19:00
tommyboy 21
28 Posts
0
January 3rd, 2008 20:00
C3PO5
2 Intern
•
2.7K Posts
0
January 3rd, 2008 20:00
C3PO5
2 Intern
•
2.7K Posts
0
January 3rd, 2008 20:00
Kaneh Bosm
5 Posts
0
July 16th, 2008 04:00
First, what do I look for in a USB? - I'm not familiar with a USB as a storage device, my only knowledge of USB is the one that I use to plug in my digital camera.
To try and solve the "Low Disk Space" msg, it was suggested that I copy the files/folders to CDs, inserting them one at a time, then delete everything except the recovery folder (located in the "sources" folder) where the factory restore files are.
I tried this, I got a msg that my CD was too small -- there was no option to copy some of the files/folders, then insert another disk to continue copying.
So I selected folders and files to copy, as many as would fit on each CD, totalling 4 CDs. The only one that wouldn't fit was the dell/Image/factory.wim file, so I left it, and deleted all the rest, but was denied permission to delete most of the files in the Windows folder, even though they were certainly copies.
That still didn't solve the problem of the "Low Disk Space" warning, so I made sure the factory.wim file was located elsewhere, and deleted it successfully from (D:/). My assumption was that it would be re-copied at the next backup, by which time I should have had a storage solution.
That finally solved this problem, then I went on to search for a solution to another problem that had arisen at the same time ("minibcont" skin fails to load), which was also the same time we had installed Verizon internet service.
Hours later, the computer flat out died -- it froze, wouldn't turn off, then when I finally got it to turn off, it wouldn't turn on. So it's in the shop, and this might be a waste of time, but I'm afraid these issues will just arise again and I want to be ready.
Kaneh Bosm
5 Posts
0
July 16th, 2008 04:00
C3PO5
2 Intern
•
2.7K Posts
0
July 16th, 2008 04:00
Hi Kaneh
I have read your post a few times and i am not sure what you are asking !
I see you or trying to burn all of the D:\ files on CD,s and the CD,s are to small
for that , the Dell folder will only work if it copied to a USB drive that will hold it,
because it can be over 6 gig,s that is even more than a DVD can hold !
Or you trying to get all of the files off of the D:\ and just have a blank space there ?
If you or all you have to do is format the D:\ Drive .
then if you do that you can not go back to the factory setting by using F8
your factory restore will be gone !
C3PO5
2 Intern
•
2.7K Posts
0
July 16th, 2008 06:00
Hi
The D:\ is only about 10 gig,s and about 6 gig,s is used by the Dell factory restore image
and the system volume uses some of that also
so you may only have a bout 2 or 3 gig,s left for you to use
not very much space to use as a backup !
What i mean by USB drive is USB external hard drive that can
hold several hundred gig,s of information and any computer supply
shop can show you what you need !
My Big ext USB drive is 350 gigabits i have several computers back up to
it and i have about 150 gigs left .
I would think a computer needs more than 10 gig drive to backup because
if you back up every day or even once a week it will be gone in a short while .
The only thing you had to do was remove your backup off of the D: drive and you
would have been safe that way and
no more full hard drive messages would be seen .
I hope this answers your questions if not i will try again !!
Kaneh Bosm
5 Posts
0
July 17th, 2008 03:00