This post is more than 5 years old
2 Posts
0
962
July 9th, 2016 17:00
Windows 10 install disabled RAID
I ordered my XPS 8300 it from Dell with 2 RAIDed 500 GB system drives running W7 Pro. This morning I upgraded to Windows 10. The upgrade converted my RAIDed system drives into 2 separate drives. (I guess I should be happy it still boots). It seems that 1 drive is still a W7 system, and the other has W10 installed. Is there any way to reenable the RAID?
No Events found!
theflash1932
9 Legend
•
16.3K Posts
1
July 9th, 2016 18:00
Yes, but it will require deleting the data on the drive you don't want. For example, if you want to mirror the RAID 10 drive to the other, you will need to erase all the contents of the Windows 7 disk. If this was a Windows-managed disk, it would recognize two disks and install to the one you chose (or the default - usually the first disk - if you weren't paying attention).
You will need to do this in Disk Management.
howbadcanitget
2 Posts
0
July 10th, 2016 14:00
Thanks for the prompt response