Unsolved
This post is more than 5 years old
4 Posts
0
1090
October 8th, 2009 03:00
Need equivalent command for list capacity
Hi,
Microcode 5874 with SE v7.0 fails for symmaskdb list capacity command. Do we have any equivalent command?
Microcode 5874 with SE v7.0 fails for symmaskdb list capacity command. Do we have any equivalent command?
No Events found!


dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 11th, 2009 19:00
symmaskdb -sid SymmID list capacity -host HostName
DineshKandasamy
4 Posts
0
October 14th, 2009 02:00
Please find the error below
# symmaskdb -sid xxxx list capacity -host xxxxxxxxx
Feature is not available for this mircocode level.
SE: V7.0.1.0 (Edit Level: 956)
Microcode: 5874(VMAX1)
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
October 14th, 2009 04:00
emc219429
emc223883
DineshKandasamy
4 Posts
0
October 14th, 2009 05:00
Thanks for your reply. But emc219429 & emc223883 is not relavent to my issue. I am looking for eqvivalent command - symmaskdb -sid xxxx list capacity -host xxxxxxxx with combination of SE7.0 and microcode 5874.
Same command works fine with combination of SE7.0 and DMX3-24 microcode 5771 .
JaganMReddy
1 Message
0
March 6th, 2010 14:00
With V-Max, the way masking is done is changed."symmaskdb -sid XXX list capacity -host" works with prior V-Max.As the V-Max uses "Auto-provisioning groups concept", symmaskdb list capacity doesnt work.you can use "symaccess -sid xxx show view " to get almost all the details about a group except the total size.
on SE7.1, you can use symaccess -sid xxx list view -name vewname -detail, which gives with allocated total size.
Boom1
131 Posts
0
March 7th, 2010 12:00
if you have vcm state enable for your director, symmaskdb work for you.
but is you have ACLX enable and vcm disable you have to use symaccess.
rawstorage
4 Apprentice
•
423 Posts
0
March 8th, 2010 00:00
Hi,
the command you are looking for is
symaccess -sid xxx list devinfo ‑ig
This was added in SE 7.1
rawstorage
4 Apprentice
•
423 Posts
0
March 8th, 2010 00:00
Here is a sample of the output
Initiator Group Name : ESX_FARM
Last updated at : 05:04:45 PM on Thu Feb 04,2010
Host Initiators
{
IG :ESX02
IG :ESX01
}
Sym Host Cap
Dev Dir:P Physical Device Name Lun Attr (MB) Masking View Name
----- ----- ----------------------- ---- ---- ------ ------------------------
00CA 07E:0 Not Visible 0 (M) 725940 ESX_FARM
10E:1 Not Visible 0 (M) ESX_FARM
08E:0 Not Visible a (M) ESX_FARM
09E:1 Not Visible a (M) ESX_FARM
01D1 07E:0 Not Visible 1 (M) 738754 ESX_FARM
10E:1 Not Visible 1 (M) ESX_FARM
08E:0 Not Visible 24 (M) ESX_FARM
09E:1 Not Visible 24 (M) ESX_FARM
------
Total Capacity 1464694