Unsolved
This post is more than 5 years old
1 Message
0
22350
December 1st, 2013 06:00
Add DRAC user via IPMI
Hi.
Centos 6.x and OpenIPMI
We want to add DRAC users via the ipmitool. I can add and enable the user and they show up via the ipmitool commands, but the user cannot actually login into the DRAC web interface.
Any pointers?
No Events found!
DELL-Shine K
6 Operator
•
3K Posts
0
December 1st, 2013 08:00
Using IPMI tool you can only add users with ipmi privilege. For setting iDRAC privilege you need to use any of the iDRAC interfaces (Racadm, WSMAN or Web GUI). For more detail refer "Configuring Local Users" section on iDRAC user guide (Link mentioned below)
ftp://ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_remote_ent_sys_mgmt/integrated-dell-remote-access-cntrllr-7-v1.30.30_User%27s%20Guide_en-us.pdf