UNSOLVED
Changing time on iDRAC6 through Linux racadm program
Hi,
I'm working on a PowerEdge R710 and am using an iDRAC6 to administer it. My problem is that the time on the iDRAC is not set to the same time as the PowerEdge server. I've googled around and from what I can see you're meant to use the 'racadm' utility with an option of 'setractime' or for the later versions, something along the lines of 'racadm config -g [option group] -o [option] -v [value]'.
However, when I try to do this, the racadm program supplied does not recognise the 'setractime' and going through the configuration options I can't find anything which sets the time on the board.
Has anyone had this problem before? How do you change the time using the Linux racadm program?
Thank you
SFJ7746968080
1 Message
5026
0
Posted June 30th, 2011 15:00
I am having the same problem where the time is not synchronized after restart / cold start.
What is the current suggestions and advice??
JCasares
2 Posts
5026
0
Posted November 11th, 2010 05:00
I'm currently having this same issue. It seems with iDRAC6 you can't use that command anymore but there is no other option.