Unsolved
This post is more than 5 years old
10 Posts
0
5379
July 11th, 2016 23:00
Connect OMSA to a remote server
Hello
I am a system admin for some SMB clients.
OMSA is installed in my office PC.
I wish to connect to my clients Dell servers from my PC.
All clients has Dell Servers with ESXi 5.5/6.0 hypervisors. OMSA vib is installed on the host.
What ports should I forward in the client router, so my office OMSA can connect to the client host?
-Roei
No Events found!
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.3K Points
0
July 12th, 2016 10:00
Hi,
The ports that OMSA uses are on Page 14 http://topics-cdn.dell.com/pdf/dell-opnmang-srvr-admin-v8.1_reference%20guide5_en-us.pdf
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.3K Points
0
July 12th, 2016 15:00
Use the other one on that page, it starts on page 13, which is managed nodes for Vcenter.
roeibrauner
10 Posts
0
July 12th, 2016 15:00
BTW, I did forward all these ports to the ESXi host, but was unable to connect to the host.
-Roei
roeibrauner
10 Posts
0
July 12th, 2016 15:00
Thank you.
This article is very long, can you please be more specific - and page 14 has 2 tables.
Should I use "Dell OpenManage Server Administrator" table?
Do I need all this ports in order to connect to a the host with OMSA?
-roei