Unsolved
This post is more than 5 years old
6 Posts
0
11057
July 18th, 2005 14:00
DCOM Error - Event ID 10009
Every minute an error is generated in the System Event Log, the error relates to DCOM not being able to contact a computer on the network and this appears to be caused by ITA when its polls the network.
The description of the event is as follows...
"DCOM was unable to communicate with the computer 150.100.50.231 using any of the configured protocols. "
Many of the above errors are generated, each with a different IP address, every time ITA polls or runs a discovery.
I have removed the UDP protocols and ensured the top most protocol in the list is TCP/IP but this error still appears, if anything it seems to have increased since the UDP protocols were removed.
Can anyone help?
HowieLong7777
16 Posts
0
August 31st, 2005 12:00
I too am receiving this error. I am installing Open Manage 4.4 on a PowerEdge 2650. If I install 4.3, I do not receive these errors.
Any ideas??
Message Edited by HowieLong7777 on 08-31-2005 09:58 AM