Unsolved
This post is more than 5 years old
12 Posts
0
2173
February 23rd, 2010 12:00
Hardware Failure Reporting
Hi everyone,
I was just wondering if someone could post a link or even give instructions on how to set it up so that when a hard drive/memory etc fails in a server that is managed by the Dell Management Console 1.0.2, I will receive an email notification of the issue.
Please help me out!
Thank you,
CLovell
No Events found!
clovell
12 Posts
0
February 24th, 2010 05:00
anyone?
theflash1932
11 Legend
•
16.3K Posts
0
February 24th, 2010 12:00
I don't know where the people are - I know there are people here that do. I would recommend calling Dell Technical Support and asking to speak with the OpenManage/OMSA Group. They can help you set it up or answer any questions you might have, and there is no charge whether in or out of warranty. It will also be someone in the States taking your call.
clovell
12 Posts
0
February 24th, 2010 12:00
...
reybeast1
347 Posts
0
February 24th, 2010 14:00
should be in here:
http://www.dell.com/downloads/global/solutions/Configuring_Event_Actions_in_Dell_Management_Console_v1.0.pdf
http://en.community.dell.com/groups/dell_management_console/media/default.aspx
clovell
12 Posts
0
February 25th, 2010 10:00
Thanks for the suggestions everyone, I thought I had it going right.
Now my problem is that I need to present an example of hardware failure to my superiors, and I have examples ready and I believe I have the correct "rules" in the DMC edited to do so, but I am unable to force a client policy update.
On the server that is running DMC, I opened the Altiris Agent settings and hit the "send" button and then the "update" button. Now under the configuration area of that window, the requested time is current, but the changed time is almost 24 hours behind and it hasnt updated since!
Does anyone know what may be causing this?
Any suggestions are welcome as I'm running out of time to complete this
Thanks again!