Unsolved
This post is more than 5 years old
7 Posts
0
4616
March 1st, 2005 10:00
PowerEdge 1855 Chassi
I am trying to monitor the status of a PowerEdge 1855 Chassi in Dell OpenManage IT Assistant 6.5.
When I add the IP-address of the chassi's DRAC to IT Assistant's "Discovery Range" and run a force discovery, the chassi appears in IT Assistant as unclassified and when I click on it I get an error message stating that the selected system does not have instrumentation that is recognized.
Does anyone know how to get this working?
No Events found!
tester25
626 Posts
0
March 8th, 2005 14:00
Ronstr
7 Posts
0
March 9th, 2005 05:00
The following is installed on each PowerEdge 1855 in the chassi:
Instrumentation Service
Version 5.2.0
Update Service
Version 1.9.2
Diagnostic Service
Version 3.1.1
Sun JRE - OEM Installed Version
Version 1.4.2
Secure Port Server
Version 1.0.0
Core Service
Version 1.9.0
Instrumentation Service Integration Layer
Version 1.9.0
Storage Management Service Integration Layer
Server Administrator
Version 1.9.1
Dell OpenManage Storage Management
Data Engine
Version 5.2.0
Management Tools
Version 1.0.0
Remote Access Integration Layer
Version 4.0.0
Remote Access Controller Data Populator
Version 4.00.0000
Dell OpenManage
Version 4.1.3
tester25
626 Posts
0
March 9th, 2005 13:00
1st - Check the SNMP Community on the PE1855 and make sure it matches up with that which the ITA management station is discovering via SNMP with. To do that, on the 1855, go to services, find SNMP, and go to properties, then i think it is on the security tab.
2nd - Make sure that the SNMP service is set to accept SNMP packets from either any host or at least the host with ITA running on it.
3rd - Do a new discovery and inventory of the discovery range