Unsolved
This post is more than 5 years old
2 Intern
•
374 Posts
0
8110
March 2nd, 2015 12:00
PSU failure won't clear.
So our data center lost power to one of its circuits today which caused most of our servers to kick out errors that one of the PSUs had lost power. The power came back within a few minutes and all the servers became happy again except for one.
That one server (R620) still shows a Failure detected in OMSA. We had someone check the back of the server and they confirmed both PSUs appear to be working and both have green lights and such.
Is there any way to figure out why this one hasn't cleared up and if there's anything else going on? I tried clearing the logs but that didn't seem to help at all. It's currently running OMSA 7.3.0 so I need to get it upgraded to 7.4.0.2 but our other servers with 7.3.0 are reporting in correctly after the power was restored.
Thanks!
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
43.1K Points
0
March 3rd, 2015 09:00
Hi,
Try restarting the OMSA services so that it redetects the power supply status. You can also try reseating the power supply that shows failed.
kelemvor33
2 Intern
•
374 Posts
0
March 3rd, 2015 11:00
We had tried restarting the services and even rebooting the server but nothing helped.
We then decided to try reseating the PSU and that seemed to have fixed the problem.
*sigh*