Replacing failed drive with perccli

I have perccli running under vmware and I had a drive fail.  Configuration is a 10 drive raid 10 with 2 HS.  One of the HS's took over as expected.  I tried the commands to spin down the failed drive but received same random errors.  Today I had the drive replaced (remote hands at a colo facility replaced it for me).  Now the perccli reports that the drive is Cpybck.

 

How do I either promote this drive back or make it a HS standby (either is fine)? 

32:10 and 32:11 where the original HS, 32:0 is the drive that failed and was replaced.

[root@esx1:/opt/lsi/perccli] ./perccli /c0/e32/sall show
Controller = 0
Status = Success
Description = Show Drive Information Succeeded.

Drive Information :
=================

------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
------------------------------------------------------------------------
32:0 0 Cpybck - 2.728 TB SAS HDD N N 512B ST33000650SS U
32:1 1 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:2 2 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:3 3 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:4 4 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:5 5 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:6 6 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:7 7 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:8 8 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:9 9 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:10 10 Onln 0 2.728 TB SAS HDD N N 512B ST33000650SS U
32:11 11 DHS 0 2.728 TB SAS HDD N N 512B ST33000650SS U
------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down/PowerSave|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded

 

[root@esx1:/opt/lsi/perccli] ./perccli /c0/e32/sall show rebuild
Controller = 0
Status = Success
Description = Show Drive Rebuild Status Succeeded.

----------------------------------------------------------
Drive-ID Progress% Status Estimated Time Left
----------------------------------------------------------
/c0/e32/s0 - Not in progress -
/c0/e32/s1 - Not in progress -
/c0/e32/s2 - Not in progress -
/c0/e32/s3 - Not in progress -
/c0/e32/s4 - Not in progress -
/c0/e32/s5 - Not in progress -
/c0/e32/s6 - Not in progress -
/c0/e32/s7 - Not in progress -
/c0/e32/s8 - Not in progress -
/c0/e32/s9 - Not in progress -
/c0/e32/s10 - Not in progress -
/c0/e32/s11 - Not in progress -
----------------------------------------------------------