Solved!
Go to SolutionArrayCommPath, Failover Mode for Unity?
Hi All,
My customer is trying to configure Unity array as some sort of external storage to a Hitachi array. The instruction he got is as below:
“Problem Description: In order to configure as External Storage, I need to configure: 1. "ArrayCommPath" must be disabled. 2. "Failover Mode" of ports must be set to "2". 3. Set ?trespass? bit is set in the GUI, so a second controller can takeover for a failed primary controller on a per-LU basis.
Do we still have these settings on Unity? I didn't find anything in the manual. Thanks.
Thank you!
Rainer_EMC wrote:
Hi,
I would suggest to inquire with Hitachi for newer config information - this seems to just have been copied from VNX/Celerra
From Unity OE 4.3 onwards there are new host initiator type settings which includes failovermode and trespass settings
see the command reference guide for details in the section about uemcli /remote/initiator create -host
Rainer
P.S.: As an EMC employee I would suggest to to also check the knowledgebase and elabnavigator.emc.com
Rainer_EMC
6 Operator
•
8645 Posts
2249
0
Posted August 29th, 2018 02:00
Hi,
I would suggest to inquire with Hitachi for newer config information - this seems to just have been copied from VNX/Celerra
From Unity OE 4.3 onwards there are new host initiator type settings which includes failovermode and trespass settings
see the command reference guide for details in the section about uemcli /remote/initiator create -host
Rainer
P.S.: As an EMC employee I would suggest to to also check the knowledgebase and elabnavigator.emc.com