Hello Longfella72,

I would check your settings using  security & configuration guide to make sure everything is set correctly first.  Here is a link to the Dell EMC Unity Family Security Configuration Guide.

https://dell.to/3gRmrGi

Thanks,

I'll have a look at that.

Interestingly, I've been able to get everything working on a fresh install of Server 2016

LF

Hello,

I have the same issue: on a fresh install of windows server 2016 everything works but on a fresh install of windows server 2019 it doesn't.

there is a way to make the audit fileserver work between Unity and Netwrix on windows server 2019?

thanks

Hello Esprinet,

What is your current OE on your unity?

Hello,

this is the current OE:  5.0.6.0.5.008.1609

thanks

Hello Esprinet,

It should work as long as you are configuring your unity using the security & config guide best practices.  I would check to see if Netwrix has any best practice configuration guides. 

netwrix should be able to figure out whats happening by looking at a network trace

Some general tips from the past:

enable evt file rotation / archive to keep the evt file at a decent size
relocate to an data fs (from the original vmd root) 
I have heard issues accessing the currently being written to evt file - the guidance there was to enable rotation and access after its been closed

Thanks for reply

I've already follow all the Netwrix best practices for the fileserver configuration.

The strange is all others services work perfectly only fileserver service has this issue with windows server 2019 also the ova file downloaded from Netwrix official site have this problem.