Unsolved
This post is more than 5 years old
3 Posts
0
1772
September 9th, 2019 14:00
Initiators Duplicate Unity 300
good afternoon I currently have a problem with an initiators that is associated with a host, however it indicates that the initiator should only stay with one host only. I have three hosts connected to my Unity300 storage, of which one host presents the problem and does not allow me to see all the disks and datastore at the vcenter level. Checking the initiators tab indicates that Host1 has the problem with the initiator. qn.1998-01.com.vmware:vsphere01-4485a60b vsphere01. Auto iSCSI No Software Yes The error originates with this initiator. You can see that it was generated automatically. How can I remove an initiator that is generated automatically, since it doesn't allow me to delete it. Try to ignore the initiator but the fault persists. Tell me this error message: Initiator registered with more than one host
0 events found
No Events found!
Ricardo_Lopes
14 Posts
0
September 12th, 2019 00:00
Hi @PANCER ,
Thank you for your post.
After further analysis of your issue, the behavior that you are facing can be addressed by following the steps from the archival 000493305.
Please note that before following the steps from the above page, you will need to remove the LUN mapping from any of the Hosts affected by this issue, which can impact production.
Before starting this task I recommend that a maintenance window is scheduled. If further clarification is necessary please feel free to reach our Technical Support team for further assistance.
I hope that the above details provide further insight, however if you have additional queries, please let us know by updating this post.